Proface PL7901-T11 PL7901-T11-HU01 PL7901-T11-W901 PL7901-T11-WN01 Touch Screen Monitor Protective Film

FAQ:

Question: What is Proface PL PL7901-T11 PL7901-T11-HU01 PL7901-T11-W901 PL7901-T11-WN01 Touch Screen Panel Glass Front Overlay HMI parts price?

Answer: Submit a fast quote, send VICPAS an email for best price.

Question: Replacing the 100V Unit's Backlight

Solution: If the 100V unit's display becomes dark while running the PL, there may be a problem with the backlight. If a problem is found or if the backlight is burnt out, you will need to replace it with a new one.
With the PL-570*T1 and PL-570*S1, you can replace the backlight by yourself. However, if your model is the PL-570*L1 or the PL-570T1-24VC, you will need to ask a Digital service person to replace the backlight. Please contact your nearest Digital Service Center. Also, when using the PL-570*T1 or PL-570*S1, replace the backlight following the instructions below. The part number of the replacement backlight is “GP570-BL00-MS.”

1. Loosen the screw on the backlight recover on the rear panel of the PL, to remove the cover.

2. Unplug the backlight's connector, and remove the screw which holds the backlight in place. Be careful not to drop this screw inside the PL.
3. Slide the replacement backlight into the PL, secure it in place with the attachment screw, and re-attach the connector.

4. Replace the backlight's cover and tighten its attachment screw. Be careful not to pinch the connector lines between the PL body and this cover.