PL-5700L1 PL-5700L1-M01 PL-5700L1-W01 Touch Screen Front Overlay

VICPAS supply Pro-face PL Series PL-5700L1 PL-5700L1-M01 PL-5700L1-W01 Protective Film and Touch Screen Panel with 365 days warranty and support Urgent Worldwide Shipping.

Follow the instructions given below for correct and safe use of the PL-5700L1 PL-5700L1-M01 PL-5700L1-W01 Touch Digitizer Glass Overlay Switch PL.
• Do not push on the PL-5700L1 PL-5700L1-M01 PL-5700L1-W01 Front Overlay Touch Membrane PL's screen too strongly, with either your finger or with a hard object. Excessive pressure can scratch, crack or damage the screen.
• If the screen becomes dirty or smudged, moisten a soft cloth with diluted neutral detergent, wring the cloth well, and wipe the display. Do not use thinner or organic solvents.
• Do not use a pointed object, such as a mechanical pencil or screwdriver, to press any of the PL-5700L1 PL-5700L1-M01 PL-5700L1-W01 touch panel's switches, since they can damage the display.
• Avoid exposing and operating the PL-5700L1 PL-5700L1-M01 PL-5700L1-W01 Touch Screen Monitor Protective Film PL in direct sunlight, high temperatures and humidity, and in areas where excessive dust and vibration will occur.
• To prevent the PL from overheating, be sure its air circulation vents are clear and clean, and keep the unit's operation area well-ventilated.
• Avoid operating or storing the PL near chemicals, or where chemicals can come into contact with the PL-5700L1 PL-5700L1-M01 PL-5700L1-W01 Protective Film Touch Screen unit.
• Before the PL is initially started, be sure to install its memory (DIM) module. If this module is not installed, the unit will not operate.