Proface FP3600-T11-M Front Overlay Touch Membrane Repair

Order each part separately is available

FP-3600T FP3600-T11-M PFXFP3600TAC Front Overlay Touch Screen Panel Glass FP-3600T Series Features
• High Quality TFT Color LCD Display
This unit is equipped with a 12.1-inch TFT type color LCD. This series have superb brightness and wide viewing angles, not found in ordinary laptop-type TFT LCDs.
This FP3600-T11-M PFXFP3600TAC Touch Digitizer glass Protective Film unit screen's maximum resolution is 800(H) × 600(V) pixels. This series can display 260,000 colors.
• Easy Installation In User's Cabinets and Panels
The FP's slim and compact design makes installation a snap since it was designed specifically for use as an IA (Industrial Automation) or OA (Office Automation) system monitor. The flat, front panel provides protection equivalent to the rigorous IP65f standard. Even without its optional protective cover the front panel is highly resistant to both water and dust.
• Panel can be used as a VGA Display
Since the FP3600-T11-M PFXFP3600TAC Touch Screen Monitor Front Overlay FP is equipped with an analog RGB interface and a DVI-D Interface, it can be connected to a PC and other, similar devices. (The PC's dot clock frequency, however, must be within the standard range.)
• Easy-to-use Built-In Touch Panel
The FP's built-in touch panel is standard equipment, allowing touch panel data to be output to a host PC via an RS-232C cable or USB cable. This is perfect for systems requiring both touch panel operation and data monitoring.
• USB-HUB function
This FP3600-T11-M PFXFP3600TAC Protective Film HMI Panel Glass unit has a USB-HUB function and can connect USB devices to the USB connector located on the rear of the unit.