PS600G-T11-J1 PS600G-T41-J124V PS600G-T41-E124V Film Touch

VICPAS supply Pro-face PS600G Series PS600G-T11-J1 PS600G-T41-J124V PS600G-T41-E124V Protective Film and Touch Screen Panel with 365 days warranty and support Urgent Worldwide Shipping.
• The PS600G-T11-J1 PS600G-T41-J124V PS600G-T41-E124V Touch Membrane Front Overlay PS-G must be used as a built-in component of an end-use product.
• This PS600G-T11-J1 PS600G-T41-J124V PS600G-T41-E124V Touch Digitizer Glass Protective Film unit should be installed in the front face of a metal panel.
• If this PS600G-T11-J1 PS600G-T41-J124V PS600G-T41-E124V Front Overlay Touch Panel unit is installed so as to cool itself naturally, be sure to install it in a vertical panel. Also, be sure that the PS-G is mounted at least 50mm away from any adjacent structures or equipment. If these requirements are not met, the heat generated by the PS-G's internal components may cause the unit to fail to meet UL/c-UL standard requirements.

It is strongly recommended that you use the installation gasket. Place the PS-G on a level surface with the display panel facing downward. Check that the PS-G's installation gasket is seated securely into the gasket's groove, which runs around the perimeter of the panel's frame.