Simatic IPC377E 19 6AV7230-0EA20-2CA0 Overlay Touchpad

Order each part separately is available

The 6AV72300EA202CA0 Front Overlay Touch Screen Digitizer Siemens SIMATIC HMI IPC377E 19 has been designed for use in a normal industrial environment in accordance with IEC 60721-3-3 (pollutant class 3C2 for chemical influences, 3S2 for sand and dust). You can also fasten the 6AV7 230-0EA20-2CA0 Front Overlay Touch Screen Digitizer Siemens SIMATIC HMI IPC377E 19 using a VESA (Video Electronics Standards Association) adapter. Different models of VESA adapters are offered by third-party manufacturers. The 6AV72300EA202CA0 Protective Film HMI Touch Screen Siemens SIMATIC HMI IPC377E 19 is VESA compliant and can be mounted on all kinds of applications utilizing the standard VESA100 mounting interfaces. Fasten the VESA adapter with the designated screws (M4).

The degrees of protection of 6AV7230-0EA20-2CA0 Protective Film Touchscreen Siemens SIMATIC HMI IPC377E 19 can only be guaranteed if the following requirements are met:
● In order to achieve IP65 protection degree or NEMA type4X/type12, the material thickness for the mounting cutout should be: 2 mm to 6 mm
● Permissible deviation from plane at the mounting cutout: ≤ 0.5 mm This condition must be fulfilled for the mounted device
● Permissible surface roughness in the area of the seal: ≤ 120 µm (Rz 120)