SIEMENS SIMATIC S7-300 6AG1322-1HF10-2AA0 Housing
SIEMENS SIMATIC S7-300 6AG1322-1HF10-2AA0 Housing
SIEMENS SIMATIC S7-300 SM 322 Modules 6AG1322-1HF10-2AA0 Enclosure Replacement
If your S7-300 modules 6AG1322-1HF10-2AA0 Enclosure are exposed to severe shock and/or vibrations, you must take the appropriate measures to reduce the acceleration and/or amplitude, respectively. We recommend that you install the S7-300 6AG1322-1HF10-2AA0 HMI Case on vibration-damping materials (for example, rubber-metal antivibration mountings).
Relay output module SM 322; DO 8 x Rel. AC 230 V/5 A; 6AG1322-1HF10-2AA0 Plastic Shell Properties
The SM 322; DO 8 x Rel. 230 V AC / 5 A is characterized by the following properties:
• 8 outputs, electrically isolated in groups of 1
• Rated load voltage 24 to 120 V DC, 48 V to 230 V AC
• Suitable for AC/DC solenoid valves, contactors, motor starters, FHP motors and signal lamps.
Specifications:
The table below describes the parameters of the Siemens SIMATIC SM 322 digital output modules 6AG1 322-1HF10-2AA0 Plastic Cover Parts.
| Atmospheric pressure: | 1080 to 660 hPa |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Efficiency: | 84 % |
| Part Number : | 6AG1322-1HF10-2AA0 |
| Product Line: | Siemens Simatic S7-300 |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Safety isolation: | SELV circuit |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6AG1195-7KF00-2XA0 | Siemens S7-300 safety protector HMI Case Replacement | In Stock |
| 6AG1321-1BH02-2AA0 | Siemens SIPLUS S7-300 Plastic Case SM 321 Replacement | Available Now |
| 6AG1321-1CH20-2AA0 | SIMATIC S7 300 SM 321 Plastic Shell Repair Part | In Stock |
| 6AG1321-1FF01-2AA0 | Siemens S7-300 SM 321 Housing Enclosure Repair | Available Now |
| 6AG1321-1FF10-7AA0 | Siemens S7-300 SM 321 Plastic Shell Replacement | In Stock |
| 6AG1321-1FH00-7AA0 | Siemens S7-300 SM 321 Plastic Case Replacement | In Stock |
| 6AG1321-7BH01-2AB0 | SIMATIC S7 300 SM321 HMI Enclosure Replacement | In Stock |
| 6AG1321-7TH00-4AB0 | SIMATIC S7 300 Plastic Case SM 321 Replacement | Available Now |
| 6AG1322-1BF01-2XB0 | Siemens S7-300 SM 322 Housing Repair Replacement | Available Now |
| 6AG1322-1BH01-2AA0 | Siemens S7-300 Plastic Shell SM 322 Repair | In Stock |
| 6AG1322-1CF00-7AA0 | SIMATIC S7 300 HMI Case SM 322 Replacement | Available Now |
| 6AG1322-1FF01-7AA0 | Siemens S7-300 SM 322 Housing Replacement | In Stock |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Mounting the Siemens Simatic 6AG1322-1HF10-2AA0 Housing profile rail
Answer:
1. When you mount the simatic s7 300 6AG1322-1HF10-2AA0 enclosure profile rails, allow sufficient space for mounting modules and heat elimination (at least 40 mm above and below the modules. See the figure below).
2. Mark up the 6AG1322-1HF10-2AA0 HMI Case mounting holes on the mounting surface. Drill the holes to a diameter of 6.5 +0,2 mm.
3. Screw on the SIEMENS S7-300 6AG1322-1HF10-2AA0 Housing profile rail (M6 screws).
Question: Where do I get the latest version of the operating system?
Answer: You can obtain the latest operating system versions from your Siemens partner or from the Internet (Siemens Homepage; Automation and Drives, Customer Support).
Common misspellings:
6AG1322-1HF1-2AA06A1322-1HF10-2AA0
6AG1322-1HF10-A2A0
bAG1322-1HF10-2AA0
6AG1322-11HF10-2AA0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
