SIEMENS SIMATIC S7-300 6AG1195-7KF00-2XA0 Housing
SIEMENS SIMATIC S7-300 6AG1195-7KF00-2XA0 Housing
SIEMENS SIMATIC S7-300 safety protector 6AG1195-7KF00-2XA0 Enclosure Replacement
If your S7-300 modules 6AG1195-7KF00-2XA0 Enclosure are exposed to severe shock and/or vibrations, you must take the appropriate measures to reduce the acceleration and/or amplitude, respectively. We recommend that you install the S7-300 6AG1195-7KF00-2XA0 HMI Case on vibration-damping materials (for example, rubber-metal antivibration mountings).
SIPLUS S7-300 safety protector based on 6AG1195-7KF00-2XA0 Plastic Shell with conformal coating, -25…+60 °C, safety protector between F and standard 6AG1195-7KF00-2XA0 Housing modules with redundant ET 200M connections, only use with isolating bus module.
The S7-300 6AG1195-7KF00-2XA0, for example, must not be used without taking additional measures:
in locations exposed to a high degree of ionizing radiation
in hostile environments caused, for instance, by
– dust accumulation
– corrosive vapors or gases
– strong electric or magnetic fields
in installations requiring special monitoring, for example
– elevators
– electrical installations in particularly hazardous areas
An additional measure might be, for instance, installation of the S7-300 in a cabinet or in a housing.
Specifications:
The table below describes the parameters of the Siemens SIMATIC SIPLUS S7-300 safety protector 6AG1 195-7KF00-2XA0 Plastic Cover Parts.
| Atmospheric pressure: | 1080 to 660 hPa |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Efficiency: | 84 % |
| Part Number : | 6AG1195-7KF00-2XA0 |
| Product Line: | Siemens Simatic S7-300 |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Safety isolation: | SELV circuit |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6AG1195-7KF00-2XA0 | Siemens S7-300 safety protector HMI Case Replacement | In Stock |
| 6AG1321-1BH02-2AA0 | Siemens SIPLUS S7-300 Plastic Case SM 321 Replacement | Available Now |
| 6AG1321-1CH20-2AA0 | SIMATIC S7 300 SM 321 Plastic Shell Repair Part | In Stock |
| 6AG1321-1FF01-2AA0 | Siemens S7-300 SM 321 Housing Enclosure Repair | Available Now |
| 6AG1321-1FF10-7AA0 | Siemens S7-300 SM 321 Plastic Shell Replacement | In Stock |
| 6AG1321-1FH00-7AA0 | Siemens S7-300 SM 321 Plastic Case Replacement | In Stock |
| 6AG1321-7BH01-2AB0 | SIMATIC S7 300 SM321 HMI Enclosure Replacement | In Stock |
| 6AG1321-7TH00-4AB0 | SIMATIC S7 300 Plastic Case SM 321 Replacement | Available Now |
| 6AG1322-1BF01-2XB0 | Siemens S7-300 SM 322 Housing Repair Replacement | Available Now |
| 6AG1322-1BH01-2AA0 | Siemens S7-300 Plastic Shell SM 322 Repair | In Stock |
| 6AG1322-1CF00-7AA0 | SIMATIC S7 300 HMI Case SM 322 Replacement | Available Now |
| 6AG1322-1FF01-7AA0 | Siemens S7-300 SM 322 Housing Replacement | In Stock |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Mounting the Siemens Simatic 6AG1195-7KF00-2XA0 Housing profile rail
Answer:
1. When you mount the simatic s7 300 6AG1195-7KF00-2XA0 enclosure profile rails, allow sufficient space for mounting modules and heat elimination (at least 40 mm above and below the modules. See the figure below).
2. Mark up the 6AG1195-7KF00-2XA0 HMI Case mounting holes on the mounting surface. Drill the holes to a diameter of 6.5 +0,2 mm.
3. Screw on the SIEMENS S7-300 6AG1195-7KF00-2XA0 Housing profile rail (M6 screws).
Question: Where do I get the latest version of the operating system?
Answer: You can obtain the latest operating system versions from your Siemens partner or from the Internet (Siemens Homepage; Automation and Drives, Customer Support).
Common misspellings:
6AG1195-7KF0-2XA0AG1195-7KF00-2XA0
6AG11957-KF00-2XA0
6AG1195-7KF00-ZXA0
6AG1195-7KF00-2XXA0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
