Siemens SIMATIC S7 300 6ES7327-1BH00-0AB0 HMI Case
Siemens SIMATIC S7 300 6ES7327-1BH00-0AB0 HMI Case
6ES7327-1BH00-0AB0 Siemens SIMATIC S7-300 Module Housing Repair Replacement
S7-300 6ES73271BH000AB0 SM 327 digital modules HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
Class 3M3 (mechanical requirements)
Class 3K3 (climatic requirements)
Programmable digital IO module SM 327; DI 8/DO 8 x DC 24 V/0.5 A (6ES7327-1BH00-0AB0 Plastic Shell) Properties
Properties of SM 327; DI 8/DO 8 x DC 24 V/0.5 A:
• 8 digital inputs and 8 individually configurable inputs or outputs, isolated in groups of 16
• Rated input voltage 24 V DC
• Inputs suitable for switches and 2-/3-/4-wire proximity switches (BEROs)
• Output current 0.5 A
• Rated load voltage 24 V DC
• Outputs capable of driving solenoid valves, DC contactors and indicator lights
• Dynamic change of parameters in RUN (CiR-compatible), separately at each channel.
• Readback of outputs.
VICPAS supply 6ES7327-1BH00-0AB0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the 6ES7327-1BH00-0AB0 Siemens SIMATIC SM 327 digital modules Case Parts.
| Part Number : | 6ES7327-1BH00-0AB0 |
| Atmospheric pressure: | 1080 to 660 hPa |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens Simatic S7-300 |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Safety isolation: | SELV circuit |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Efficiency: | 84 % |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6ES7322-5FF00-0AB0 | Siemens Simatic S7-300 SM 322 HMI Case Replacement | In Stock |
| 6ES7322-5GH00-0AB0 | Siemens SIPLUS S7-300 Plastic Case SM 322 Replacement | Available Now |
| 6ES7322-5HF00-0AB0 | SIMATIC S7 300 SM 322 Plastic Shell Repair Part | In Stock |
| 6ES7322-5SD00-0AB0 | Siemens S7-300 SM 322 Housing Enclosure Repair | Available Now |
| 6ES7322-5RD00-0AB0 | Siemens S7-300 SM 322 Plastic Shell Replacement | In Stock |
| 6ES7322-8BF00-0AB0 | Siemens S7-300 SM 322 Plastic Case Replacement | In Stock |
| 6ES7323-1BH01-0AA0 | SIMATIC S7 300 SM323 HMI Enclosure Replacement | In Stock |
| 6ES7323-1BL00-0AA0 | SIMATIC S7 300 Plastic Case SM 323 Replacement | Available Now |
| 6ES7326-2BF10-0AB0 | Siemens S7-300 SM 323 Housing Repair Replacement | Available Now |
| 6ES7327-1BH00-0AB0 | Siemens S7-300 Plastic Shell SM 323 Repair | In Stock |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Putting a New 6ES7327-1BH00-0AB0 Plastic Case Cover Body Module into Service
Answer: Proceed as follows to put the new module into service:
1. Open the front panel.
2. Reinstall the front connector.
3. Close the front panel.
4. Switch the load voltage back on.
5. Set the CPU to RUN mode again.
Question: When should I use expansion devices?
Answer: You can use EDs if the number of CU slots is insufficient for your application.
When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.
Common misspellings:
6ES7327-1BH00-0A0ES7327-1BH00-0AB0
6ES7327-1BH00-0BA0
6ES7327-18H00-0AB0
6ES73277-1BH00-0AB0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
