SIEMENS SIMATIC S7-300 6ES7321-7BH01-0AB0 Plastic Shell
SIEMENS SIMATIC S7-300 6ES7321-7BH01-0AB0 Plastic Shell
SIEMENS SIMATIC S7-300 SM 321 Modules 6ES7321-7BH01-0AB0 HMI Case Replacement
Digital input module SM 321; DI 16 x 24 VDC; with hardware and diagnostic interrupts (6ES7321-7BH01-0AB0 Enclosure) Properties
Properties of SM 321 6ES7321-7BH01-0AB0 Plastic Case Cover; DI 16 x DC 24 V with hardware and diagnostic interrupts:
● 16 inputs, electrically isolated in groups of 16
● Rated input voltage 24 V DC
● Input characteristics to IEC 61131, Type 2
● suitable for switches and 2- /3-/4-wire proximity switches (BEROs)
● 2 short circuit proof sensor supplies for each group of 8 channels
● external redundant sensor supply is supported
● "Sensor supply (Vs)" status display
● Group error display (SF)
● Supports isochronous mode
● Supports parameter reassignment in RUN
● Programmable diagnostics
● Programmable diagnostic interrupt
● Programmable hardware interrupts
● Programmable input delays
Specifications:
The table below describes the parameters of the Siemens SIMATIC SM 321 digital input modules 6ES7 321-7BH01-0AB0 Plastic Cover Parts.
| Atmospheric pressure: | 1080 to 660 hPa |
| Efficiency: | 84 % |
| Power consumption: | 57 W |
| Product Line: | Siemens Simatic S7-300 |
| Temperature: | –40 °C to +70°C |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Part Number : | 6ES7321-7BH01-0AB0 |
| Power loss: | Typ. 9 W |
| Safety isolation: | SELV circuit |
| Warranty: | 365 days Warranty |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6ES7195-7KF00-0XA0 | Siemens S7-300 safety protector HMI Case Replacement | In Stock |
| 6ES7321-1BH02-0AA0 | Siemens SIPLUS S7-300 Plastic Case SM 321 Replacement | Available Now |
| 6ES7321-1BH10-0AA0 | SIMATIC S7 300 SM 321 Plastic Shell Repair Part | In Stock |
| 6ES7321-1BH50-0AA0 | Siemens S7-300 SM 321 Housing Enclosure Repair | Available Now |
| 6ES7321-1BL00-0AA0 | Siemens S7-300 SM 321 Plastic Shell Replacement | In Stock |
| 6ES7321-1CH00-0AA0 | Siemens S7-300 SM 321 Plastic Case Replacement | In Stock |
| 6ES7321-1CH20-0AA0 | SIMATIC S7 300 SM321 HMI Enclosure Replacement | In Stock |
| 6ES7321-1EL00-0AA0 | SIMATIC S7 300 Plastic Case SM 321 Replacement | Available Now |
| 6ES7321-1FF01-0AA0 | Siemens S7-300 SM 321 Housing Repair Replacement | Available Now |
| 6ES7321-1FF10-0AA0 | Siemens S7-300 Plastic Shell SM 321 Repair | In Stock |
| 6ES7321-1FH00-0AA0 | SIMATIC S7 300 HMI Case SM 321 Replacement | Available Now |
| 6ES7321-7BH01-0AB0 | Siemens S7-300 SM 321 Housing Replacement | In Stock |
| 6ES7321-7RD00-0AB0 | SIMATIC S7-300 SM 321 HMI Enclosure Repair | Available Now |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: How often do I have to replace battery?
Answer:
Backup battery: We recommend an annual replacement
Rechargeable battery: Never needs to be replaced.
Question: How to install a new 6ES7321-7BH01-0AB0 Cover Body module?
Answer:
Install the new module as follows:
1. Insert the new module of the same type and swing it down into place.
2. Screw-tighten the module.
3. Slip the labeling strip of the removed module into its guide on the new module.
Common misspellings:
ES7321-7BH01-0AB06ES7321-7H01-0AB0
6E7S321-7BH01-0AB0
6ES7321-7BH01-0A80
6ES7321--7BH01-0AB0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
