Quick Service for Full HMI Parts Replacement
Home / All / Sigmatek HMI /

Sigmatek TAE 151 Touch Screen Panel Glass Replacement

Sigmatek TAE 151 Touch Screen Panel Glass Replacement

Detail Information

12-200-151 Touch Anzeigeeinheit SIGMATEK TAE 151 Touch Screen Glass Front Overlay


Sigmatek 12-200-151 Touch Anzeigeeinheit SIGMATEK TAE 151 Touch Screen Glass Protective Film Repair Replacement

The Sigmatek TAE 151 control panel is an intelligent terminal for programming and visualization of automated processes. Process diagnosis as well as operating and monitoring automated procedures is simplified using this TAE 151 Protective Film Touchscreen Panel terminal. A TAE151 Front Overlay touch screen serves as the input medium for process data and parameters. A glass touch-screen serves as the input medium for process data and parameters; the output is shown on a 15“ VGA TFT color display. With the LSE mask editor, graphics can be created on the PC, then stored and displayed on the terminal. The available interface connections can be used to exchange process data or configure the TAE 151 Front Overlay Touchscreen Panel Glass terminal. A micro-SD card serves as the storage medium for the operating system, application and application data. The integrated, high-performance bus can be used to control I/O modules directly.


VICPAS supply Sigmatek 12-200-151 Touch Anzeigeeinheit TAE 151 touchscreen panel with protective film overlay, all of them are brand new with 365 days VICPAS warranty. The installation touch terminal TAE 151 serves the visualizing of automated processes. Process diagnosis, control and the operation and observation of automatic procedures are simplified by this installation touch terminal. A touch folio serves the input of process data and parameters. Output takes place on a 15 inch XGA TFT color display.



Specifications:

The table below describes the parameters of the Sigmatek 12-200-151 Touch Anzeigeeinheit TAE 151 Front Overlay Touchscreen Panel.

Part Number : TAE151
Product Line: Sigmatek
Screen diagonal 15 in
Warranty: 365 Days Warranty
Input Power 24 VDC
Display Type: TFT color
Mounting position: Vertical
Input Type: Touchscreen
Serial interface Type: RS232
Storage -20 to 70°C


Related Sigmatek Panel Part No. :

Touch Anzeigeeinheit Description Inventory status
TAE 0811 Sigmatek Touch Anzeigeeinheit Touch Screen Repair In Stock
TAE 121 Sigmatek Touch Anzeigeeinheit Touchscreen Repair In Stock
TAE 151 Touch Anzeigeeinheit Sigmatek Touch Panel Replacement Available Now
TAE 1921 Touch Anzeigeeinheit Sigmatek HMI Touch Screen Glass Available Now
TAE 1921-K Sigmatek Touch Anzeigeeinheit Touch Screen Panel Repair In Stock
TAE 1922-K Sigmatek Touch Anzeigeeinheit Touch Membrane Repair In Stock
TAE 1931 SIGMATEK Touch Anzeigeeinheit HMI Touch Glass Repair In Stock
TAE 1941 Sigmatek Anzeigeeinheit Touch Digitizer Glass Repair Available Now
TTAE534 Sigmatek Touch Anzeigeeinheit HMI Panel Glass Replacement Available Now
SIGMATEK HMI Description Inventory status

SIGMATEK Control Panel Manuals PDF Download:

  • Sigmatek TAE151 Controller User Manual
  • Sigmatek TAE 151 HMI Panel Datasheet

  • FAQ:

    Question:How to Cleaning SIGMATEK TAE 151 Touch Screen Panel Glass?

    Answer:

    CAUTION!
    Before cleaning the touch screen, the terminal must first be turned off to avoid unin-tentionally triggering functions or commands!

    The SIGMATEK TAE 151 terminal's touch screen can only be cleaned with a soft, damp cloth. To dampen the cloth, a screen-cleaning solution such as an antistatic foam, water with detergent or alcohol should be used. First spray the cleaning fluid on the cloth and not directly on the terminal. The cleaning solution should not be allowed to reach the terminal electronics, for example, through the ventilation slots.


    No erosive cleaning solutions, chemicals, abrasive cleansers or hard objects that can scratch or damage the touch screen may be used.


    If the terminal is soiled with toxic or acidic chemicals, quickly and carefully clean the termi-nal to prevent corrosion.


    To ensure the optimal function of the terminal, the touch screen should be cleaned at regular intervals!

    To extend the lifespan of the touch screen as much as possible, using the fingers to operate the terminal is recommended.


    Question:What are the functions of Sigmatek TAE151 Touch Protective Foil?

    Answer: To extend the lifespan of the touch screen as must as possible, a protective foil is places of the touch field.
    The foil adds the following properties.
    • High chemical stability
    • Hard surface
    • Splitter protection
    • Easy to clean
    • Matt anti-reflective surface


    Question:What is the price of SIGMATEK TAE151 Front Overlay and Touch Screen Panel?

    Answer: Submit a quote request, send us an email for our best price.


    Common misspellings: :

    TAE15
    TA151
    TA1E51
    ATE151
    TAEl51
    TAE1511


    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web