Quick Service for Full HMI Parts Replacement
Home / All / Sigmatek HMI /

Sigmatek ETV1211 Front Overlay Touchscreen Repair

Sigmatek ETV1211 Front Overlay Touchscreen Repair

Detail Information

Einbauterminal VARAN SIGMATEK ETV1211 Touch Screen Glass Front Overlay Repair

Order each part separately is available

Einbauterminal VARAN SIGMATEK ETV1211 Touch Screen Glass Protective Film Repair Replacement

The Sigmatek ETV1211 control panel is an intelligent terminal for programming and visualization of automated processes. Process diagnosis as well as operating and monitoring automated procedures is simplified using this ETV1211 Protective Film Touchscreen Panel terminal. A ETV 1211 Front Overlay touch screen serves as the input medium for process data and parameters. The output is shown on a 12.1" SVGA TFT color display. With the LSE mask editor, graphics can be created on the PC, then stored and displayed on the terminal. The available interface connections can be used to exchange process data or configure the ETV1211 Front Overlay Touchscreen Panel Glass terminal. A micro-SD card serves as the storage medium for the operating system, application and application data. The integrated, high-performance VARAN bus can be used to control I/O modules directly.


VICPAS supply Sigmatek Einbauterminal VARAN ETV1211 touchscreen panel with protective film overlay, all of them are brand new with 365 days VICPAS warranty.



Specifications:

The table below describes the parameters of the Sigmatek VARAN ETV1211 Front Overlay Touchscreen Panel.

Part Number : ETV1211
Product Line: Sigmatek VARAN
Screen diagonal 12.1 in
Warranty: 365 Days Warranty
Input Power 24 VDC
Display Type: TFT color
Mounting position: Vertical
Input Type: Touchscreen
Serial interface Type: RS232
Storage -20 to 70°C


Related Sigmatek Panel Part No. :

Sigmatek VARAN Description Inventory status
ETV 1211 Sigmatek Einbauterminal VARAN Touch Screen Protective Film Repair In Stock
ETV 1221 Einbauterminal VARAN Sigmatek Touch Panel Protective Film Replacement Available Now
ETV 1251 Sigmatek Einbauterminal VARAN Touchscreen Protective Film Repair In Stock
ETV 1521 Einbauterminal VARAN Sigmatek HMI Touch Screen Glass Protective Film Available Now
ETV 1581 Sigmatek Einbauterminal VARAN Touch Screen Panel Front Overlay Repair In Stock
ETV 1591 Sigmatek Einbauterminal VARAN Front Overlay Touch Membrane In Stock
ETV 1921 Sigmatek Einbauterminal VARAN HMI Touch Glass Front Overlay Repair In Stock
ETV 1941 Sigmatek Einbauterminal VARAN Touch Digitizer Glass Overlay Repair Available Now
ETV 1961-K Sigmatek Einbauterminal VARAN HMI Panel Glass Protective Film Available Now
ETV 1991 Einbauterminal VARAN Touch Screen Monitor Front Overlay Replacement In Stock
ETV 1991-K Sigmatek Einbauterminal VARAN MMI Touch Screen Front Overlay In Stock
ETV 1992-K Sigmatek Einbauterminal VARAN HMI Touch Screen Protective Film In Stock
SIGMATEK HMI Description Inventory status

SIGMATEK ETV1211 Control Panel Manuals PDF Download:

  • Sigmatek ETV1211 Controller User Manual
  • Sigmatek ETV1211 HMI Panel Datasheet

  • FAQ:

    Question:How to Cleaning SIGMATEK ETV1211 Touch Screen Panel Glass?

    Answer:

    CAUTION!
    Before cleaning the touch screen, the terminal must first be turned off to avoid unin-tentionally triggering functions or commands!

    The SIGMATEK ETV1211 terminal's touch screen can only be cleaned with a soft, damp cloth. To dampen the cloth, a screen-cleaning solution such as an antistatic foam, water with detergent or alcohol should be used. First spray the cleaning fluid on the cloth and not directly on the terminal. The cleaning solution should not be allowed to reach the terminal electronics, for example, through the ventilation slots.


    No erosive cleaning solutions, chemicals, abrasive cleansers or hard objects that can scratch or damage the touch screen may be used.


    If the terminal is soiled with toxic or acidic chemicals, quickly and carefully clean the termi-nal to prevent corrosion.


    To ensure the optimal function of the terminal, the touch screen should be cleaned at regular intervals!

    To extend the lifespan of the touch screen as much as possible, using the fingers to operate the terminal is recommended.


    Question:What are the functions of Sigmatek ETV1211 Touch Protective Foil?

    Answer: To extend the lifespan of the touch screen as must as possible, a protective foil is places of the touch field.
    The foil adds the following properties.
    • High chemical stability
    • Hard surface
    • Splitter protection
    • Easy to clean
    • Matt anti-reflective surface


    Question:What is the price of SIGMATEK ETV1211 Front Overlay and Touch Screen Panel?

    Answer: Submit a quote request, send us an email for our best price.


    Common misspellings: :

    ETV211
    ETV121
    ET1V211
    TEV1211
    E7V1211
    ETVl211
    ETV12111
    ETTV1211


    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web