Schneider MPCST52NAN20N Protective Film Touch Screen
Schneider MPCST52NAN20N Protective Film Touch Screen
Schneider Magelis MPCST52NAN20N Touch Digitizer Glass Protective Film Replacement
Schneider Magelis Smart iPC MPCST52NAN20N Front Overlay Touch Panel Glass Terminal is the ideal operator terminal for Windows client applications. It is open to the web and functions as an extension of dedicated terminals and the industrial PC. MPCST52NAN20N Touch screen panel Protective Film Smart Terminal meets the demands of pre-defined operator dialog, display and remote diagnostics utilizing:
• Standard Windows XPe technologies
• Touch-sensitive screen and viewing angle of up to 160°
• Compact, rugged construction that is hardened and UL 508, CSA certified
• Fast Ethernet 10/100Mbps port, compact flash cards, two PCMCIA expansion slots that make it easier to utilize and upgrade
VICPAS supply MPCST52NAN20N Magelis Schneider Terminal Front Overlay Touch screen glass with 365 Days warranty and support Urgent Worldwide Shipping. Extra care should be taken with respect to the specification concerning vibration levels when installing or moving the MPCST52NAN20N Touchscreen digiziter glass front overlay terminal. If the MPCST52NAN20N Protective Film HMI Panel Glass Smart terminal is moved, for example, while it is installed in a rack equipped with caster wheels, the unit can receive excessive shock and vibration.
Specifications:
The table below describes the parameters of the MPCST52NAN20N Magelis Schneider Front Overlay Touch Screen Panel.
Part Number: | MPCST52NAN20N |
Display Type: | LCD TFT |
Screen Diagonal: | 15 in |
Warranty: | 365 Days |
Product Line: | Magelis Smart Series |
Terminal Type: | Touchscreen Display |
Operating Temp.: | 0...50 °C |
Storage Temp.: | -20...60 °C |
Display Resolution: | 1024 x 768 pixels XGA |
Operating System: | Windows XPe SP2 |
Related Schneider Magelis Smart Series Part No. :
Magelis Smart | Description | Inventory status |
MPCKT52NAX00B | Schneider Magelis Smart Touch Screen Protective Film Repair | In Stock |
MPCST11NDJ00T | Magelis Smart Schneider Touch Panel Protective Film Replacement | Available Now |
MPCST52NAJ20H | Schneider Magelis Smart Touchscreen Protective Film Repair | In Stock |
MPCST52NDJ00T | Magelis Smart Schneider HMI Touch Screen Glass Protective Film | Available Now |
MPCST52NDJ10T | Schneider Magelis Smart Touch Screen Panel Front Overlay Repair | In Stock |
MPCST52NDJ10R | Schneider Magelis Smart Front Overlay Touch Membrane | In Stock |
MPCST21NDJ20T | Schneider Magelis Smart HMI Touch Glass Front Overlay Repair | In Stock |
MPCST21NAJ20T | Schneider Magelis Smart Touch Digitizer Glass Overlay Repair | Available Now |
MPCST52NAJ20T | Schneider Magelis Smart HMI Panel Glass Protective Film | Available Now |
MPCST11NAJ00T | Magelis Smart Touch Screen Monitor Front Overlay Replacement | In Stock |
MPCST11NAJ00H | Schneider Magelis Smart MMI Touch Screen Front Overlay | In Stock |
MPCST52NAN20N | Schneider Magelis Smart HMI Touch Screen Protective Film | In Stock |
Schneider Magelis | Description | Inventory status |
Schneider Magelis Smart HMI Manuals PDF Download:
FAQ:
Question: How to install the Schneider Magelis Smart MPCST52NAN20N Unit?
Answer:
1. Place the unit face down on a dry, soft surface and attach the gasket to the rear side, in the installation groove (see picture below):2. Check that the gasket is correctly attached to the unit. The upper surface of the gasket should protrude evenly approximately 2 mm (0.08 in.) out of the groove.
Note: When installing the Smart unit's installation gasket, avoid contact with the sharp edges of the Smart's frame, and press the gasket completely into its groove.
3. Insert each installation fastener securely into the slot’s recess at the top and bottom of the unit:
4. Attach and Secure the Rear Installation Attachments:
5. Insert each of the fasteners. Pull the fastener back until it is flush with the rear of the attachment hole.
Note: The corresponding installation attachments can be purchased as spare parts with the maintenance kit ref.: MPC YK 50 MNT KIT.
6. Use a screw driver to tighten to 0.5 N•m (4.5 lb-in) each of the fastener screws and secure the Smart in place:
7. Smart Viewing Angle.
Ensure that the panel’s viewing angle is tilted no more than 30 degrees from parallel to the operator (i.e. operator is directly in front).
Question: When an alarm appears on Magelis Schneider MPCST52NAN20N Protective Film Touch Panel Glass Terminal, what does it means?
Answer:
• The alarm relay is closed (if this function is selected).
• The alarm strip is updated.
Common misspellings:
MPCST5NAN20NMPCST52NAN2N
MPCS752NAN20N
MPCST25NAN20N
MPCST52NAN200N
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content