HMIDT35X HMIDT35XFH Front Overlay HMI Panel Glass
HMIDT35X HMIDT35XFH Front Overlay HMI Panel Glass
Schneider Magelis HMI HMIDT35X HMIDT35XFH Touch Screen Monitor Protective Film Repair Part
Order each part separately is available
HMIDT35X HMIDT35XFH Touch Digiziter Glass Front Overlay Harmony GTUX is a modularly designed robust terminal suitable for harsh outdoor environments. HMIDT35X HMIDT35XFH Protective Film Touch Screen Panel Schneider Terminal Features like high brightness and UV protection to direct sunlight, protection against water and dust, and supporting a wide range of temperatures make it an ideal choice for direct outdoor operation in O&G, WWW, and MMM segments. Harmony eXtreme panels can be used in applications like smart energy generation (solar, wind turbine, biomass, hydropower genset, etc.), hoisting, compressor, pumping, and car charging/washing.
EcoStruxure is Schneider Electric's innovative IoT architecture addressing the needs of automation applications for a wide range of industries. The Harmony GTUX HMIDT35X HMIDT35XFH Front Overlay Touch screen Magelis panels meet IIoT challenges at the Edge Control level by enabling secured communication from connected products on the shop floor to the required software and applications on the top floor. This provides improved profitability and new business opportunities through enhanced asset performance for more efficient operation and maintenance of capital assets.
VICPAS supply HMIDT35X HMIDT35XFH Schneider Harmony GTUX Protective Film and Touch screen panel glass with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the HMIDT35X HMIDT35XFH Magelis Schneider Front Overlay Touch Screen.
Part Number: | HMIDT35X HMIDT35XFH |
Display device: | TFT Color LCD |
Display Size: | 7 in. |
Warranty: | 365 Days Warranty |
Material: | Polyester or Polycarbonate |
Display Resolution: | 800 x 480 (WVGA) |
Operating Temp.: | -30...65 °C (-22...149 °F) |
Storage Temp.: | -30...70 °C (-22...158 °F) |
Conductive Trace: | Silver or Copper |
Life Cycle: | 5 Million Cycles(up to) |
Related Schneider Harmony GTUX Series Part No. :
Harmony GTUX | Description | Inventory status |
HMIDT35X | 7"W Touch Screen Glass Protective Film | In Stock |
HMIDT35XFH | Harmony GTUX 7"W Touch Screen Panel Overlay | In Stock |
HMIDT65X | 12.1W Touch Membrane Front Overlay | Available Now |
HMIDT65XFH | 12.W HMI Touch Glass Protective Film | In Stock |
HMIDT75X | 15.6W Touch Digitizer Glass Front Overlay | Available Now |
HMIDT75XFH | 15.6W Protective Film Touch Screen Monitor | In Stock |
Harmony GTUX | Description | Inventory status |
Schneider Harmony GTUX Manuals PDF Download:
FAQ:
Question: How to remove the Schneider Magelis Harmony GTUX HMIDT35X HMIDT35XFH SD Card?
Answer: If you remove the SD Card while it is in use, you risk corrupting your data. Before removing the SD Card from this product, stop all operations on the SD Card.
1. Make sure the Card Access LED is off.
2. Open the Storage Card Cover
3. Push the SD Card once to release, and pull out the card.
NOTE: After using the SD Card, store the SD Card in its case or other safe location.
4. Close the Storage Card Cover.
Question: What is the size of HMIDT35X HMIDT35XFH Protective Film HMI Panel Glass?
Answer: The Schneider Terminal HMIDT35X HMIDT35XFH Touch Screen Monitor Front Overlay is 7-inch.
Common misspellings:
HMDT35XHMIDT3X
HIMDT35X
HMID735XFH
HMIDT335XFH
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content