6AV2124-0JC01-0AX0 TP900 Comfort Aluminum Cover
6AV2124-0JC01-0AX0 SIMATIC HMI TP900 COMFORT 6AV2 124-0JC01-0AX0 Touch Panel, Overlay, Aluminum Enclosure, Power Supply Connector, Gasket, Mounting Clips and LCD Display Repair Replacement
Order each part separately is available
Note when operating the 6AV2 124-0JC01-0AX0 Simatic HMI TP900 comfort capacitive single-touch screen:
● Surface contact with a diameter of about 5 to 20 mm is required for an operator action to be detected.
● An operation with gloves with a material thickness of <2 mm is detected in most cases. However, check the usefulness of the gloves you are using.
● To avoid incorrect operation, certain inputs are ignored and blocked from further entry:
– Simultaneous operation with multiple fingers.
– Surface contact with a diameter of > 3 cm, for example, resting the palm of the hand on the touch screen
– As soon as the touch screen is no longer touched, input is possible again.
VICPAS supply 6AV2124-0JC01-0AX0 Siemens TP900 comfort touch panel, Front Overlay, Aluminum Case Cover Body, Gasket, Power Supply Connector, Mounting Clips and LCD display. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Simatic 6AV2124-0JC01-0AX0 TP900 Comfort Features
6AV2124-0JC01-0AX0 Front:
• External dimensions of the front and mounting cutout correspond to the standard product
• Durable powder coating
• High UV resistance
• GFG (Glass-Film-Glass) touch screens, analog resistive
• Manual or automatic brightness control with brightness sensor
6AV2124-0JC01-0AX0 Display:
• High-resolution TFT display in widescreen format with 16 million colors
• Suitable for use in daylight
• Anti-reflective and bonded for glare-free reading
6AV2124-0JC01-0AX0 Touch screen:
• Capacitive single-touch screen
• Suitable for operation with thin gloves, touch pen for capacitive touch screen and fingers
Specifications:
The table below describes the parameters of the 6AV2124-0JC01-0AX0 Siemens TP900 Comfort HMI Parts.
| Part Number : | 6AV2 124-0JC01-0AX0 |
| Touchscreen: | colour LCD display |
| Display | “ TFT-LCD dynamic color screen |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens TP900 Comfort |
| Active power input, typ.: | 18 W |
| Mounting position: | vertical |
| Key Features: | Touch screen support |
| Language: | Worldwide |
| Type of supply voltage | DC |
Related Simatic TP900 Comfort Part No. :
| Siemens TP900 Comfort | Description | Inventory status |
| 6AG1124-0JC01-4AX0 | SIMATIC HMI TP900 COMFORT Aluminum Enclosure | In Stock |
| 6AV2124-0JC01-0AX0 | SIMATIC HMI TP900 COMFORT Aluminum Housing | Available Now |
| 6AV2144-8JC10-0AA0 | SIPLUS HMI TP900 COMFORT INOX Aluminum Case | In Stock |
| SIMATIC HMI TP900 Comfort | Description | Inventory status |
Siemens TP900 Comfort HMI Manuals PDF Download:
FAQ:
Question: What is the 6AV2124-0JC01-0AX0 Siemens TP900 Comfort HMI Aluminum Enclosure price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Question: Removing the 6AV2124-0JC01-0AX0 Touch Screen LCD Display Protective Film Aluminum Case Siemens TP900 Comfort PRO device?
Answer:The HMI device is generally removed in the reverse order for mounting and connecting. Proceed as follows:
1. When a project is running on the HMI device, close the project using the HMI device configured for this purpose. Wait for the Start Center to be displayed.
2. Switch off power to the Siemens 6AV2124-0JC01-0AX0 Touch Overlay LCD Housing HMI device.
3. When you are using the HMI device in the hazardous area, make sure that one of the two following requirements is met: The area is no longer hazardous or the device and its plug-in connections are de-energized.
4. Open the connection compartment by removing the terminal compartment cover.
5. Remove all cable ties that were installed for tension relief of the connecting cables in the terminal compartment of the HMI device.
6. Remove all plug-in connectors and the equipotential-bonding cable from the Simatic TP900 Comfort 6AV2124-0JC01-0AX0 HMI device.
7. Remove the HMI device from the support arm or pedestal. Make sure that you do not damage the connecting cables.
8. Fasten the terminal compartment cover to the device with the 2 screws, torque 1.5 Nm.
Question: How to set the 6AV2124-0JC01-0AX0 Siemens TP900 screen saver?
Answer: You can set the following time intervals in the Control Panel:
● Automatic activation of the screen saver
● Automatic reduction in the display backlighting
The 6AV2124-0JC01-0AX0 HMI device exhibits the following behavior based on the settings:
● The screen saver is automatically activated if the HMI device is not operated within the specified period of time.
● Touching the touch screen switches off the screen saver. If you touch a button at the same time, the function assigned to the button is not executed. In addition, the reduction of the backlighting according to the settings of the screen saver is canceled.
Common misspellings:
6AV2124-0J01-0AX06V2124-0JC01-0AX0
6AV1224-0JC01-0AX0
6AV2124-0JC0l1-0AX0
6AV2124-0JC01-oAX0
6AV21224-0JC01-0AX0
6AV2124-0JC011-0AX0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
