Quick Service for Full HMI Parts Replacement
Home / All / Mitsubishi / Mitsubishi GOT-F900 Series /

F920GOT-BBD-K-E GOT900 Membrane Keyboard Keypad

F920GOT-BBD-K-E GOT900 Membrane Keyboard Keypad

F920GOT-BBD-K-E GOT900 Membrane Keyboard Keypad
CategoriesMitsubishi GOT-F900 Series
BrandVICPAS
ModelF920GOT-BBD-K-E
BrandMitsubishi
Warranty365 Days
Product LineMitsubishi GOT-F900 F920GOT-K series
SupplyF920GOT-BBD-K-E Membrane Keypad Switch
Size3 inch
ModelF920GOT-BBD-K-E
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Download
Update TimeNov 9,2024
Detail Information

Mitsubishi GOT-F900 F920GOT-K series HMI F920GOT-BBD-K-E HMI Membrane Keyboard Keypad Repair Kit.


Mitsubishi F920GOT-K series HMI F920GOT-BBD-K-E Membrane Keypad Switch Repair Kit

The Mitsubishi F920GOT-K series HMI F920GOT-BBD-K-E Membrane Keyboard Keypad uses SQL statements to directly transmit data from the connected industrial devices to a database server. The communication with the database is configured in GT Works3 without any programming. There is no need for a gateway computer or complex programming to communicate with the MES database server.


Connect the GOT-F900 F920GOT-K FF920GOT-BBD-K-E to the programming port of the FX Series PLC. Program transfer and monitoring are available in the GOT-F900 Series using the built-in two-port interface function through connection of a personal computer to the RS-232C port. (In the Handy GOT, the rear cover would have to be open.) When connecting the FREQROL Series inverter, check the COM port designation, the OS version of the GOT-F900, and the applicable versions of the screen creation software.


During the servo amplifier/test operation, when the communication between the GOT-F900 F920GOT-K F920GOT-BBD-K-E and the servo amplifier is interrupted for 0.5[ms] or more, the servo amplifier decelerates, stops, and then gets into the servo lock status. During the servo amplifier/test operation, continue the communication constantly by monitoring the status display of the servo amplifier on the GOT-F900 F920GOT-BBD-K-E screen, etc.




  Contact Best Price  


Specifications:

The table below describes the parameters of the F920GOT-BBD-K-E Mitsubishi F920GOT-K Membrane Keypad Switch.

Part Number: F920GOT-BBD-K-E
Display device:STN monochrome LCD
Screen diagonal: 3 in
Warranty: 365 Days
Product Line:Mitsubishi F920GOT-K Series
Input Power:24VDC (+10%, -15%)
Operating Temperature: 0 to 55°C
Resolution:240 x 80 dot
Storage Temperature:-20°C to 60°C
Cooling Method: Self-cooling


Related Mitsubishi F920GOT-K Series Part No. :

Mitsubishi GOT-F900 Description Inventory status
F920GOT-BBD5-K Mitsubishi GOT-F900 Membrane Keyboard Keypad Repair In Stock
F920GOT-BBD5-K-C Membrane Keyboard Mitsubishi GOT900 F920GOT-K Available Now
F920GOT-BBD5-K-E Mitsubishi F920GOT-K Membrane Keypad Switch In Stock
F920GOT-BBD-K Mitsubishi F920GOT-K Operator Panel Keypad Repair In Stock
F920GOT-BBD-K-C Mitsubishi F920GOT-K Keyboard Membrane Replacement In Stock
F920GOT-BBD-K-E Keypad Membrane GOT-F900 F920GOT-K Replacement Available Now
Mitsubishi F920GOT-K HMI Description Inventory status


Mitsubishi GOT-F900 Series HMI Manuals PDF Download:

  • F930GOT Series Installation Manual
  • Mitsubishi Mitsubishi GOT-F900 Brochure
  • Mitsubishi GOT-F900 Operation Manual
  • Graphic Operation Terminal 800 900 series User's Manual

  • FAQ:

    Question: What is the size of F920GOT-BBD-K-E Operator Keyboard?

    Answer: The Mitsubishi GOT-F900 F920GOT-K F920GOT-BBD-K-E Operator Keyboard is 3-inch.


    Question: How to replace the backlight of Mitsubishi GOT-F900 F920GOT-BBD-K-E Terminal?

    Answer: Replace the backlight (spare part) using the following procedure.

    1) F920GOT-K
    The backlight is not required to be replaced because it is the LED type.
    2) F930GOT and F933GOT
    Insert and install the CF card into the CF card interface with its front side outside.
    a) Turn off the power.
    b) While pressing claws at the four corners, move upward the rear cover.
    c) Disconnect the backlight connector.
    d) While pressing the claw of the backlight, move upward the backlight in the direction A by approximately 10mm (0.39").
    e) Pull out the backlight in the direction B, then install a new backlight.
    f) Accommodate the new backlight in the order "4)→3)→2)" which is reverse of the order above.
    How to replace the backlight of Mitsubishi GOT-F900 F920GOT-BBD-K-E Terminal?
    3) F940GOT and F943GOT
    a) Turn off the power.
    b) Remove mounting screws at the four corners
    c) Slowly remove the rear cover.
    Caution: If the rear cover is pulled with an excessive force, the cable connecting the rear cover may be disconnected, or the PCB may be damaged. Be careful.
    d) Disconnect the backlight connector.
    e) Remove the backlight F9GT-40LTS from the backlight fixing holder.
    The backlight can be removed easily by inserting a screwdriver into the holder.
    f) Install a new backlight F9GT-40LTS.
    g) Accommodate the new backlight in the order "4)→3)→2)" which is reverse of the order above.How to replace the backlight of Mitsubishi GOT-F900 F920GOT-BBD-K-E Terminal?
    4) F930GOT-K, F940WGOT and Handy GOT
    For replacement of the backlight or the LCD, consult with the Mitsubishi distributor nearest to your company.


    Common misspellings: 

    F920GOT-BBD--E
    F920GOT-BD-K-E
    F92G0OT-BBD-K-E
    F920GOT-8BD-K-E
    F920GOT-BBD-K--E


    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web