F930GOT-TWD-E Front Overlay Touch Membrane Repair
F930GOT-TWD-E Front Overlay Touch Membrane Repair
Mitsubishi GOT-F900 F930GOT series HMI F930GOT-TWD-E Touch Screen Glass Protective Film Repair Kit.
Order each part separately is available
The GOT-F900 Touch screen panel glass and protective film hmi is an open type device (device installed to another device) and must be installed in a conductive control panel or cabinet. It not only assure the safety but also has a large effect to shut down the noise generated from GOT, on the control panel.
The bit device ON/OFF function is provided on the user screen of the GOT-F900 and the forced ON/OFF function is provided on the device monitor screen in the HPP mode. These functions are also available when the SYSMAC C Series PLC is connected as the host unit.
The new GOT-F900 F930GOT-TWD-E Touch Screen Tablet Protective Film is suitable for applications in any industry. The new white model GOT provides an additional color option, and the flush frame without the USB port can be cleaned very easily. The GOT can be installed vertically for extra flexibility when installed in confined spaces. VICPAS supply F930GOT-TWD-E Mitsubishi F930GOT Protective Film Touchscreen glass with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the F930GOT-TWD-E Mitsubishi F930GOT Touch Digitizer Front Overlay.
Part Number: | F930GOT-TWD-E |
Display device: | STN monochrome LCD |
Screen diagonal: | 4 in |
Warranty: | 365 Days |
Product Line: | Mitsubishi F930GOT Series |
Input Power: | 24VDC (+10%, -15%) |
Operating Temperature: | 0 to 55°C |
Resolution: | 240 x 80 dot |
Storage Temperature: | -20°C to 60°C |
Cooling Method: | Self-cooling |
Related Mitsubishi F930GOT Series Part No. :
Mitsubishi GOT-F900 | Description | Inventory status |
F930GOT-BWD | Mitsubishi GOT-F900 Touch Screen Monitor Overlay Repair | In Stock |
F930GOT-BWD-C | Touch Screen Protective Film Mitsubishi GOT900 F930GOT | Available Now |
F930GOT-BWD-E | Mitsubishi F930GOT Touch Screen Glass Front Overlay | In Stock |
F930GOT-BWD-SG | Mitsubishi F930GOT Touch Protective Film Replacement | In Stock |
F930GOT-BWD-T | Mitsubishi F930GOT Touch Screen Overlay Replacement | In Stock |
F930GOT-TWD-E | HMI Panel Glass Overlay GOT-F900 F930GOT Repair | Available Now |
Mitsubishi F930GOT HMI | Description | Inventory status |
Mitsubishi GOT-F900 Series HMI Manuals PDF Download:
FAQ:
Question: What is the F930GOT-TWD-E GOT-F900 F930GOT touchscreen HMI price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Question: What is the Battery Replacement Procedure of Mitsubishi GOT-F900 F930GOT-TWD-E?
Answer:When the battery voltage drop detection device turns ON, immediately replace the battery using the following replacement procedure.
The backlight is not required to be replaced because it is not built in from the beginning (battery-less type).
2) F930GOT, F933GOT and F930GOT-K
a) Turn off the power.
b) Remove the rear cover.
c) Remove the existing battery from the holder, and disconnect its connector.
d) Insert the connector of a new battery within 30 seconds.
e) Insert the new battery into the holder, and attach the cover.
3) F940GOT, F943GOT and F940WGOT
a) Turn off the power.
b) Open the small slot in the rear cover.
c) Remove the existing battery from the holder, and disconnect its connector.
d) Insert the connector of a new battery within 30 seconds.
e) Insert the new battery into the holder, and close the small slot.
4) Handy GOT
a) Turn off the power.
b) Remove four mounting screws from the rear cover, then remove the rear cover.
c) Remove the existing battery from the holder, and disconnect its connector.
d) Insert the connector of a new battery within 30 seconds.
e) Insert the new battery into the holder, and attach the cover.
Common misspellings:
F930GOT-TWD-F930GOTTWD-E
F93OGOT-TWD-E
F930GOT-TDW-E
F930GOT-TWD-EE
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content