A975GOT-TBA-EU GOT900 Touch Screen Protective Film
A975GOT-TBA-EU GOT900 Touch Screen Protective Film
Mitsubishi GOT-A900 A975GOT series HMI A975GOT-TBA-EU HMI Touch Glass Front overlay Repair Kit.
Order each part separately is available
The Mitsubishi A975GOT series HMI A975GOT-TBA-EU Touch Screen Hmi Overlay uses SQL statements to directly transmit data from the connected industrial devices to a database server. The communication with the database is configured in GT Works3 without any programming. There is no need for a gateway computer or complex programming to communicate with the MES database server.
With high-speed control and convenience fully assured, Mitsubishi A975GOT series HMI A975GOT-TBA-EU Touch Digitizer and Front overlay controllers compatible with the iQ Platform and the GOT-A900 are the keys to higher productivity at lower cost. PLCs, motion controllers, CNCs, robot controllers, and C controllers are integrated into one as controllers compatible with the iQ Platform. The GOT-A900 integrates different types of monitor units that were previously connected to each controller
During the servo amplifier/test operation, when the communication between the GOT-A900 A975GOT-TBA-EU and the servo amplifier is interrupted for 0.5[ms] or more, the servo amplifier decelerates, stops, and then gets into the servo lock status. During the servo amplifier/test operation, continue the communication constantly by monitoring the status display of the servo amplifier on the GOT-A900 A975GOT-TBA-EU screen, etc.
Specifications:
The table below describes the parameters of the A975GOT-TBA-EU Mitsubishi A975GOT Touch Glass Overlay.
| Part Number: | A975GOT-TBA-EU |
| Display device: | TFT color liquid crystal |
| Screen diagonal: | 10.4 in |
| Warranty: | 365 Days |
| Product Line: | Mitsubishi A975GOT Series |
| Input Power: | 24VDC (+10%, -15%) |
| Operating Temperature: | 0 to 55°C |
| Resolution: | 640 x 480 dots |
| Storage Temperature: | -20°C to 60°C |
| Cooling Method: | Self-cooling |
Related Mitsubishi A975GOT Series Part No. :
| Mitsubishi GOT-A900 | Description | Inventory status |
| A975GOT-TBA | Mitsubishi GOT-A900 Touch Screen Monitor Overlay Repair | In Stock |
| A975GOT-TBA-B | Touch Screen Protective Film Mitsubishi GOT900 A975GOT | Available Now |
| A975GOT-TBA-CH | Mitsubishi A975GOT Touch Screen Glass Front Overlay | In Stock |
| A975GOT-TBA-EU | Mitsubishi GOT900 A975GOT Touch Protective Film | In Stock |
| A975GOT-TBD | Mitsubishi A975GOT Touch Screen Overlay Replacement | In Stock |
| A975GOT-TBD-B | HMI Panel Glass Overlay GOT-A900 A975GOT Repair | Available Now |
| A975GOT-TBD-CH | Mitsubishi GOT900 Front Overlay Touch Panel Glass | In Stock |
| A975GOT-TBD-EU | Mitsubishi GOT-A900 Touch Screen Protective Film Repair | Available Now |
| Mitsubishi A975GOT HMI | Description | Inventory status |
Mitsubishi GOT-A900 Series HMI Manuals PDF Download:
FAQ:
Question: What is the size of A975GOT-TBA-EU Touch Screen Panel Glass?
Answer: The Mitsubishi GOT-A900 A975GOT A975GOT-TBA-EU touch panel is 10.4-inch.
Question: How to installing and removing procedures of the GOT-A900 A975GOT-TBA-EU CF card?
Answer: Install/remove the CF card with the power supply of GOT is OFF or CF card access switch is "OFF".
Insert and install the CF card into the CF card interface with its front side outside.
2. Removing
1) Set the CF card access switch of the GOT to "OFF", and make sure that the CF card access LED turns off. (When the CF card access LED turns off, the CF card can be removed even during the GOT power on.)
2) Open the cover of the CF card interface.
Push the CF card eject button of the GOT.
(The CF card eject button is pulled out after pushing at once.)
Common misspellings:
A975GOT-TBA-UA975OT-TBA-EU
A975GOT-TA-EU
A9T5GOT-TBA-EU
A975GOT-TBAA-EU
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
