B&R 5D2500.22 Provit 2500 Switch Membrane

B&R Provit 2500 5D2500.22 Membrane Keypad Keyboard Repair

The "brsram.sys" device driver is used to operate the internal 256 KByte SRAM memory. The Provit 2500 5D2500.22 device driver is on the "Provit 2500 Utilities" diskette in the "SYS" directory. After starting the driver, all DOS file operations are possible without limitations. The "brpcmcia.sys" 5D2500-22 device driver allows easy management of FPROM or SRAM PC Cards, that can be used in slots 1 and 2 on Provit 2500 5D2500.22 controllers. Previously, the B&R driver supported external PC cards up to 2 MByte. Using the device driver (starting with Rev. 02.42), it is possible to address up to 63 MByte. A Provit 2500 5D2500-22 device driver has to be started for each slot (card). A device driver cannot be started twice in DOS, therefore the device driver "brpcmcia.sys" has to be copied using another name and then started (e.g. "brpcmci2.sys").

To upgrade your Provit 2500 5D2500.22 system BIOS to a newer version, you need the Upgrade 5D2500-22 Diskette. This is available on the Provit Drivers & Utilities CD (Mod. No. 5S0000.01-090) or on the B&R Homepage.
• An upgrade could be necessary for a few reasons:
• The system BIOS was destroyed or damaged and the IPC can no longer be booted.
• To update the functions implemented in BIOS Setup or to add new function or components.

Specifications:

The table below describes the parameters of the 5D2500.22 B&R Provit 2500 Membrane Keypad Keyboard.

Related B&R Provit Series Part No. :

B&R Provit Manuals PDF Download: