B&R 4PP045.0571-K40 HMI Touch Glass Protective Film
B&R 4PP045.0571-K40 HMI Touch Glass Protective Film
B&R Power Panel PP45 4PP045.0571-K40 Touch Panel Front Overlay
Order each part separately is available
Power Panel devices are equipped with 2 hex switches that serve as operating mode switches. Switch positions 01 to FD are available for any purpose in an application and can be evaluated by the application program.
B&R touch screen devices are equipped with a touch controller that supports hardware calibration. This means that the devices are pre-calibrated from stock. This feature proves advantageous in the case of a replacement part because a new calibration is no longer required when exchanging devices (identical model / type). Nevertheless, we recommend calibrating the device in order to achieve the best results and to better readjust the touch screen to the user's preferences. Windows CE starts the touch screen calibration sequence during its first boot in the default configuration / delivered state. After first starting Windows XP embedded (First Boot Agent), the touch screen driver must be installed in the device in order to operate the touch screen. The corresponding drivers can be downloaded from the download area on the B&R homepage (www.br-automation.com). The touch screen should be calibrated during driver installation. The first time the touch screen is used, it must be calibrated once in the customer application for the existing device and project.
Specifications:
The table below describes the parameters of the 4PP045.0571-K40 Power Panel 45 Front Overlay Touchscreen Panel.
| Part Number : | 4PP045.0571-K40 |
| Product Line: | Power Panel 45 |
| Screen diagonal | 5.7 in |
| Warranty: | 365 Days Warranty |
| Input Power | 24 VDC |
| Display Type: | TFT color |
| Mounting position: | Vertical |
| Input Type: | Touchscreen |
| Serial interface Type: | RS232 |
| Storage | -20 to 70°C |
Related Power Panel 45 Series Part No. :
| Power Panel 45 | Description | Inventory status |
| 4PP045.0571-K40 | B and R Power Panel 45 Touch Screen Glass Overlay Replacement | In Stock |
| 4PP045.0571-K42 | Power Panel 45 B&R HMI Touch Glass Protective Film | In Stock |
| 4PP045.0571-K43 | B and R Power Panel 45 Touch Screen Monitor | In Stock |
| 4PP045.0571-K47 | PP45 B&R Protective Film HMI Touch Screen Replacement | Available Now |
| 4PP045.0571-K52 | Power Panel 45 B&R Touch Screen Organizer Front overlay | In Stock |
| 4PP045.0571-K55 | B and R Power Panel 45 Touch Screen Tablet Protective Film | Available Now |
| 4PP045.0571-K56 | B&R Power Panel 45 Touch Screen Replacement | In Stock |
| 4PP045.0571-L42 | B&R Power Panel 45 Touch Digitizer Front Overlay Repair | In Stock |
| 4PP045.0571-X74 | PP45 B and R Touch Screen Glass Replacement | Available Now |
| B and R PP45 | Description | Inventory status |
B&R Power Panel 45 Manuals PDF Download:
FAQ:
Question: How can the Automation Panel B&R 4PP045.0571-K40 service life of the backlight be extended?
Answer:
• By setting the display brightness to the lowest value that is still comfortable for the eyes
• By using dark images
• By reducing the brightness by 50%, which can result in an approximately 50% increase in the half-brightness time
Question: How to clean the B&R Power Panel 45 4PP045.0571-K40 Terminal Devices?
Answer:
This device should be cleaned with a moist cloth. The cloth should be moistened with water and detergent, a screen cleaning agent or alcohol (ethanol). The cleaning agent should be applied to the cloth beforehand, not sprayed directly on the device! Aggressive solvents, chemicals, scouring agents, pressurized air or steam jets should never be used.
Common misspellings:
4P045.0571-K40
PP045.0571-K40
4PP045.057l-K40
4PP045.o571-K40
4PP0450.0571-K40
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
