6FC5203-0AF10-1AA0 Siemens SINUMERIK OP010FS Membrane Switch

Operator Panel of 6FC5 203-0AF10-1AA0
OP010FS 6FC52030AF101AA0 Housing Operator Keyboard is used for Yaskawa Siemens CNC Series. Beside there are two types of the keyboard for OP010FS,i.e. QWERTY type and ABCD type, concerning arrangement and illustration of each key. For differences between these keyboards, please refer to Section 8.1 "Comparison table for keys".

Hot Keys of 6FC5 203-0AF10-1AA0 Membrane Switch HMI Case
• By pressing this key of 6FC5203-0AF10-1AA0, the last opened screen in Start-up Operating Area can be displayed.
• By pressing this key, the last opened screen in Machine Operating Area can be displayed.

Reset Key of 6FC52030AF101AA0 HMI Case Terminal Keypad
This key is on ABCD type keyboard.
When you press the "Reset" key of 6FC5203-0AF10-1AA0:
• Processing of the current parts program is aborted
• Signals from the monitoring function of 6FC52030AF101AA0 Operator Panel Keypad HMI Cover are cleared (except for alarms signaling POWER ON, NC Start and Acknowledge alarm)
• The channel is switched to the "Reset" state,i.e.
-The NC control remains synchronized with the machine
-The control of 6FC5 203-0AF10-1AA0 Plastic Cover Keyboard Membrane is in the initial state and ready for another program run. (See also /FB/, K1, Description of Functions Mode Group, Channel, Program Operation Mode)
Reset key of 6FC5203-0AF10-1AA0 Keypad Membrane HMI Shell will work only, if machine manufacturer has implemented the function internally via the PLC interface.