2711P-T7C4D1 PanelView Plus 700 Touch Screen Protective film

Order each part separately is available

VICPAS supply Panelview Plus 700 2711P-T7C4D1 protective film touchscreen LCD display Housing Label Gasket and Mounting Clips for repair replacement, make the HMI running. We provide a 365 days VICPAS warranty of the most product, which include most of touch screen panel, membrane keypad, LCD display and protective case shell housing.

The 2711P-T7C4D1 is an Allen-Bradley PanelView Plus 700 operator terminal. The discontinued 2711P-T7C4D1 PanelView Plus 700 is an operator terminal that enables the user to interface with their machine. This PanelView Plus terminal is ideal for applications with a need to observe, change, and display information graphically. The 2711P-T7C4D1 is programmed with RSView Studio Machine Edition. Some of this module's features include multi-vendor communications, trending, expressions, data logging, animation, and RSView Studio direct browsing of RSLogix 5000 addresses. This HMI has a 6.5-inch Color Display and allows the user to connect using FactoryTalk View Machine Edition software and an Ethernet and RS-232 communication port, along with a 1761-NET-ENI communication cable(s). The user is able to control the HMI using the Touchscreen to input information and data.

The 2711P-T7C4D1 is powered using 18 to 32 Volts of DC power. This terminal has 64 MB of internal memory. The approximate shipping weight and dimensions are 8 lbs. and 14 x 11 x 8 inches. The most common Series include A, B, C, D, E, F, G, and the most common firmware is not applicable. EtherNet/IP (Ethernet Industrial Protocol) is an open industrial network that supports real-time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal. The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The parameters are downloaded with the application.