2711P-T7C15A2 PanelView Plus 700 Touch Screen Protective film

Order each part separately is available

VICPAS supply Panelview Plus 700 2711P-T7C15A2 protective film touchscreen LCD Panel Plastic shell Gasket Label and Mounting Clips for repair replacement, make the HMI running. We provide a 365 days VICPAS warranty of the most product, which include most of touch screen panel, membrane keypad, LCD display and protective case shell housing.

The Allen-Bradley 2711P-T7C15A2 PanelView™ Plus 6 real-time monitoring terminal has a display size of 6.5 inches. The display is a touchscreen that shows display information graphically. Operators can control it easily because the 2711P-T7C15A2 is user-friendly. This terminal supports the Windows CE 6.0 Operating System and supports FactoryTalk View Machine Edition software version 6.0. Besides being a display module, it is also a logic module and a communication module. The 2711P-T7C15A2 has a replaceable battery. The battery life of this terminal is around four years minimum at 25 °C. Remove the power first when you want to remove or replace the battery. This terminal has a 128-MB flash memory and a 512-MB RAM (with 79 MB of free user memory). It also has an SD card slot.

The Allen-Bradley 2711P-T7C15A2 comes with an integrated AC power supply. The power rating is 85-264V AC (47-63 Hz) and 160 VA maximum. A ground connection is required for electromagnetic compliance (EMC) with the EMC directives of the European Union (EU) for the CE mark of conformity. The wire gauge of the protective earth is 14-12 AWG. The wire gauge of the functional earth is 14-10 AWG. A protective earth ground connection should be used for safety and regulatory compliance. Improper electrical wiring may cause damage to the communications connectors. Wiring failure may result in electric shock.

The discontinued Allen Bradley Panelview Plus 700 2711P-T7C15A2 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5 in. Color Display. This Panelview allows the user to connect using FactoryTalk software and a ControlNet communication port with a 1747-KFC15A communication cable(s). The user is able to control the HMI using the Touchscreen to input information and data. If applicable, this unit has an internal backlight replacement part number of 2711P-RL7C. The approximate shipping weight and dimensions are 8 lbs. and 14 x 11 x 8 inches, respectively. The most common Series are: Series A, B, C, D, E, F, and G, and the most common firmware is not applicable. The ControlNet terminals can connect to a single or multiple controllers on a ControlNet network. They support scheduled and unscheduled access to controller data and redundant cabling. The ControlNet terminals support symbolic CIP addressing when communicating with a ControlLogix system. Every terminal features a Network Access port for local access to the ControlNet network. Application files are easily downloaded or uploaded using PanelBuilder32 software over the ControlNet link, directly via the onboard RS-232 printer port, or with a PC memory card.