2711P-K7C15A2 PanelView Plus 700 Membrane Keypad

Order each part separately is available

This Panelview 2711P-K7C15A2 allows the user to connect using FactoryTalk View Machine Edition software and a Ethernet and RS-232 communication port with a 1761-NET-ENI communication cable(s). The user is able to control the HMI using the Keypad to input information and data. This unit is powered using 18-32 VDC power.The discontinued Allen Bradley Panelview Plus 700 2711P-K7C15A2 is an operator terminal that enables the user to interface with their machine. This HMI has a 6.5 in. Color Display.

VICPAS supply Panelview Plus 700 2711P-K7C15A2 membrane keypad switch LCD front cover Protection Board Gasket Label and Mounting Clips for repair replacement, make the HMI running. We provide a 365 days VICPAS warranty of the most product, which include most of touch screen panel, membrane keypad, LCD display and protective case shell housing.

The 2711P-RN20 Ethernet communication module is available for the 700 to 1500 terminals if another Ethernet port is required. The module has its own unique IP address. This port has an RJ45, 10/100Base-T connector for network communication and supports MDI/MDI-X connections. The most common Series are: Series A, B, C, D, E, F, G and the most common firmware is not applicable. EtherNet/IP (Ethernet Industrial Protocol) is an open industrial network that supports real time I/O messaging, as well as message exchange. The Ethernet port connects to a controller on an EtherNet/IP network by using both the network and standard Ethernet connections. This port can work with application transfers and printing as well. The EtherNet/IP screen displays and allows the user to modify some of the EtherNet/IP communication settings for a PanelView terminal.