2711T-T10R1N1 2711T-F10G1N1 Touch Screen Panel Replacement

Allen Bradley MobileView Tethered Operator Terminal 2711T-T10R1N1 2711T-F10G1N1 Touch Screen Glass Membrane Keyboard Protective Film Repair

Touch Screen Calibration

The 2711T-T10R1N1 2711T-F10G1N1 Touch Screen Panel Protective Film Operator Keyboard is calibrated before shipment. You can recalibrate the touch screen. Resistive touch screens are activated when you apply pressure to the touch screen with your finger. You can operate 2711T-T10R1N1 2711T-F10G1N1 Terminal Keypad Front Overlay HMI Touch Glass while gloves are worn. Resistive touch screens accept only single finger input. Multi-finger input or 'palm contact' can cause an incorrect touch input. Do not use sharp objects, such as a screwdriver, on Allen Bradley 2711T-T10R1N1 2711T-F10G1N1 Protective Film Membrane Keypad MMI Panel Screen. Scratching the surface of the touch screen can damage the display and compromise the IP rating.

Use this feature to calibrate touch screen sensitivity. Follow the instructions that are displayed during calibration.

When the following conditions are present, the MobileView 2711T terminal can get 'stuck' in an application loop:
• The FactoryTalk ME application does not have a shutdown button
• EWF is enabled with the FactoryTalk ME application set to auto-run
• Hibernate once, resume many (HORM) is being used To resolve this loop with Rescue, perform the following steps.
1. On the MobileView 2711T terminal desktop, tap Rescue.
2. This dialog box appears.
3.

4. Tap OK. The MobileView Tethered Operator Terminal 2711T-T10R1N1 2711T-F10G1N1 Front Overlay Touch Screen Glass Membrane Switch terminal automatically restarts.

Specifications:

The table below describes the parameters of the Allen Bradley MobileView Tethered Operator Terminal 2711T-T10R1N1 2711T-F10G1N1 Protective Film Touch Screen Tablet Membrane Switch.

Related Allen Bradley HMI Part No. :

Allen Bradley MobileView Tethered Operator Terminal Manuals PDF Download: