Membrane keyboard for 2711P-K10C4D9 membrane keypad switch

FAQ:

Question: How to delete Log Files of PanelView Plus 6 from terminal?

Answer : You can delete log files, alarm history files, and alarm status files from the System Default location on the terminal.
1. Select Terminal Settings>File Management>Delete Files>Delete Log Files. You are asked to confirm the deletion of the files.
Do you want to delete all of the Factory Talk View ME Station Log Files?
2. Select Yes or No. Log files not located in the System Default location will not be deleted.

Question: What tools are required for 2711P-K10C4D9 installation？

Answer: Panel cutout tools.
Small, slotted screwdriver.
Torque wrench (lb•in) for tightening the mounting clips on the PanelView Plus 700 to 1500 and PanelView Plus CE terminals.

Question: How to access panelview plus 6 2711P-K10C4D9 configuration mode?

Answer: Your PanelView Plus 6 device has onboard software, FactoryTalk View ME Station, to perform and configure terminal operations. When you reset or start the terminal, you automatically enter Configuration mode, unless your.MER application is automatically set to run on startup.

To access Configuration mode from a running application, press the Goto Configuration Mode button. This button is added to the application screen in FactoryTalk View Studio. The application stops running but is still loaded

---

IMPORTANT To access Configuration mode from a running application, you must add a Goto Configuration Mode button to an application screen.

---

On PanelView Plus 6 Terminals HMI device, you can enter Configuration mode from the Start menu or the desktop.

• Select Start>Programs>Rockwell Software>FactoryTalk View>FactoryTalkView ME Station.
• Select the FactoryTalk View ME Station icon on the desktop.

• Load Application (F1): Opens another screen where you can select an application to load. Once loaded, the application name will appear under Current Application.


• Run Application (F2): Runs the .mer application displayed under Current Application. An application must be loaded before you can run it. Application Settings (F3) Opens a menu of application-specific configuration settings. Terminal Settings (F4) Opens a menu of options to configure non-application, specific terminal settings for the PanelView Plus device.


• Delete Log Files Before Running (F5): Toggles between Yes and No. If you select Yes, all data log files, alarm history and alarm status files will be deleted before the application is run. If you select No, log files are not deleted first.


• Reset (F7): Resets the terminal. The action that occurs on startup for PanelView Plus CE devices depends on whether you defined shortcut paths in the Windows Startup folder. On other PanelView Plus devices, the action on startup depends on configured startup options.
Exit (F8): Exits Configuration mode.