6AG1642-0DA01-4AX1 Siemens SIMATIC HMI OP177B Touch Panel

Order each part separately is available

Proceed as follows to change settings in the OP177B Control Panel:
1. Open the Control Panel with the "Control Panel" button.
2. To open the required dialog, double-click on its icon.
3. Change the tab as required.
4. Make the necessary changes.
Touch the corresponding input object.
– Use the screen keyboard of the HMI device to enter the new values in the text boxes.– Touch a button to operate it.
– To open a selection list, touch the triangle at the end of the field. Touch the required entry from the selection list.
– Touch the check box to activate or deactivate a check box.
– Touch a radio button to select it.
5. Confirm the selection with the OK button or abort the entry with the X button. The dialog closes.
6. Close the Control Panel with the X button. The Loader appears.

Interfaces on the OP 177B HMI device
① Chassis terminal for equipotential bonding
② Power supply connector
③ RS -485/RS -422 interface (IF 1B)
④ PROFINET connection (applies to OP 177B PN/DP)
⑤ USB connection

OP 177B offers an additional feature. It can now be operated using widely available touchscreens in addition to the membrane keyboard. The function keys can be configured to system keys for specific screens.

VICPAS supply 6AG1642-0DA01-4AX1 Siemens OP177B Touchscreen, Membrane Keyboard, Display, Display Bracket, Screws, Power Supply Connector, Mounting Clips, Gasket and Plastic Case Shell with 12 months warranty and support Urgent Worldwide Shipping.