UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Touchpad Overlay
UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Touchpad Overlay
Advantech UTC-520 Series UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Front Overlay Touch Screen Display Replacement
Order each part separately is available
Mounting Instruction
When mounting the HMI Advantech UTC-520 Series UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Touch Digitizer Glass Front Overlay, more than one person should perform the installation. Be careful and prevent accidental damage to the Advantech HMI UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Protective Film Touch Screen Panel or personal injury.
Wall Mounting
1. Select the location on the wall for the wall mount plate.
2. Mark the locations of the two plate screw holes on the wall.
3. Drill two pilot holes at the marked locations on the wall.
4. Align the wall mount plate screw holes with the pilot holes.
5. Secure the mount plate to the wall by inserting screws into the two pilot holes and tightening them. Be careful not to drop the Advantech screen UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Front Overlay Touch Membrane to the ground.
6. Insert four M4 screws into the holes on the panel PC and tighten them to secure the bracket to the rear panel. Check the stability of Advantech UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E touch screen HMI Touch Glass Protective Film again.
7. To mount the panel PC on the wall, align the wall mount bracket attached to the panel PC with the wall mount plate on the wall and slide the panel PC downward to hang the bracket on the mount plate.
8. Secure the panel PC in place by tightening the screws into the wall mount bracket.
Specifications:
The table below describes the parameters of the Advantech UTC-520 Series UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E HMI Touch Glass Front Overlay.
Touchscreen: | 5-Wire Analog Resisitive |
Display Type: | TFT LCD |
Brand: | Advantech |
Operating Temperature: | 0 ~ 40° C (32 ~ 104° F) |
Front Panel Protection: | IP65 |
Environment: | Free From Corrosive Gases |
Product Line: | UTC-520 Series |
Display Size: | 21.5'' |
Warranty: | 1-Year Warranty |
Light Transmission: | 80±5% |
Related Advantech HMI No. :
Advantech HMI | Description | Inventory status |
FPM2120GR3A1302E-T | Advantech Protective Film Touch Membrane Repair | Available Now |
FPM-2120G-R3AE | Advantech Touchscreen Front Overlay Replacement | In Stock |
FPM2120GR3B1601E-T | Advantech Front Overlay Touch Screen Film Repair | Available Now |
FPM-2120GR3B1601-T | Advantech Touch Screen Display Protective Film Replacement | In Stock |
FPM-2120GR3B1602-T | Advantech HMI Panel Screen Front Overlay Repair | Available Now |
FPM-2120GR3B1603-T | Advantech Protective Film Touch Screen Tablet Replacement | In Stock |
FPM-2120GR3B1604-T | Advantech Touch Screen Display Front Overlay Repair | Available Now |
FPM-2120GR3B1701-T | Advantech Protective Film Touch Screen Glass Replacement | In Stock |
FPM2120GR3B1702E-T | Advantech Front Overlay Touch Panel Repair | Available Now |
FPM-2120GR3B1702-T | Advantech Front Overlay Touch Digitizer Glass Repair | Available Now |
FPM-2120GR3B1703-T | Advantech Touch Panel Front Overlay Replacement | In Stock |
FPM-2120GR3B1704-T | Advantech Protective Film Touch Screen Display Repair | Available Now |
FPM-2120GR3B1801-T | Advantech Touchscreen Front Overlay Replacement | In Stock |
FPM-2120GR3B1802-T | Advantech Front Overlay Touch Screen Film Repair | Available Now |
FPM-2120GR3B1803-T | Advantech Touch Screen Display Protective Film Replacement | In Stock |
Advantech HMI | Description | Inventory status |
Advantech HMI Manuals PDF Download:
FAQ:
Question: How do I calibrate the touch screen on Advantech UTC-520 series HMI?
Answer: To calibrate the touch screen, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.
Question: Which way can I finish the mounting without causing damage to Advantech UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Touch Digitizer Glass Front Overlay?
Answer: Wall mounting, panel mounting, arm mounting and stand mounting will not do damage to Advantech UTC-520D-RE UTC-520FR-ATB0E UTC-520GR-ATB0E UTC-520HR-ATB0E Touch Panel Protective Film.
Common misspellings:
TC-520D-RE
UTC-5520D-RE
TUC-520D-RE
UT-520FR-ATB0E
UTTC-520FR-ATB0E
UTC-520FR-ATB0EE
UUTC-520GR-ATB0E
UCT-520GR-ATB0E
UTC-520GR-AT0BE
UTC-520HHR-ATB0E
UTC-520HR-TAB0E
UTC-520HR-ATBE0
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content