PPC3120S1601E-T PPC3120S1602E-T PPC3120S1701E-T PPC3120S1702E-T LCD Overlay MMI Panel

Disassembling Method

To disassemble the components, follow these steps: Start by removing the rear cover, ensuring caution not to drop the Advantech HMI Panel PC Series PPC-3120S PPC3120S1601E-T PPC3120S1602E-T PPC3120S1701E-T PPC3120S1702E-T Front Overlay Touch Screen Glass LCD Panel while undoing the 15 screws. Proceed to take out the control board with 3 screws, followed by the AD board with 4 screws. Detach the power board by unscrewing 4 screws, ensuring the Advantech screen PPC3120S1601E-T PPC3120S1602E-T PPC3120S1701E-T PPC3120S1702E-T LCD Display Touch Panel Front Overlay is disconnected. Next, remove the LO bracket with 3 screws. Prior to disassembling 9 screws and 4 posts to remove the middle bracket, remove the HMI Advantech PPC3120S1601E-T PPC3120S1602E-T PPC3120S1701E-T PPC3120S1702E-T Touch Digitizer Glass LCD Display Panel Protective Film. Separate the LCD bracket left and right from the LCD module by undoing 4 screws. Then, remove the LED board by disassembling 1 screw. Lastly, remove the waterproofing from the front bezel of the Advantech touch screen PPC3120S1601E-T PPC3120S1602E-T PPC3120S1701E-T PPC3120S1702E-T LCD Display Screen Protective Film HMI Panel Screen.