KEBA Kemro K2-400 OF 450/Z OF450/Z Front Overlay Touch Glass
KEBA Kemro K2-400 OF 450/Z OF450/Z Front Overlay Touch Glass
KEBA Kemro K2-400 OF 450/Z OF450/Z Front Overlay HMI Panel Glass Replacement
KEBA Kemro K2-400 OF 450/Z OF450/Z Touch Screen Monitor Front Overlay Stationary operating device Product properties
• For industrial applications
• Industrial-grade touch operation
• Expandable and adaptable
KEBA Kemro K2-400 OF 450/Z OF450/Z Front Overlay Touch Panel operating panels are stationary operating devices for use in industrial environments. Thanks to the flexible construction, expansion is possible by means of additional modules, thereby facilitating an optimum, system-specific adaptation. The KEBA Kemro K2-400 OF 450/Z OF450/Z Touchscreen Glass Protective Film Terminal is designed as a monitor solution, i.e., the visualization runs centrally on the controller CPU. Elegant front plate made of milled aluminum with opening for an emergency stop or additional toggle switch.
Specifications:
The table below describes the parameters of the KEBA Kemro K2-400 OF 450/Z OF450/Z Touch Digitizer Protective Film HMI Parts.
| Ambient Temperature: | 0°C (32°F) to 50°C (122°F) |
| Brand: | KEBA |
| Product Line: | KEBA Kemro K2 |
| Storage Temperature: | -20 to 60 °C (-4 to 140 °F) |
| Touch Size: | 8" |
| Display Colors: | 16 million colors |
| Display Type: | TFT Color LCD |
| Power Supply: | 24 V DC |
| Touch Screen: | Resistive screen |
| Warranty: | 12-Month Warranty |
Related KEBA Kemro Series Part No. :
| KEBA Kemro HMI | Description | Inventory status |
| KeTop T100-014-CES 66329 | KEBA Membrane Keyboard HMI Touch Screen Replacement | In Stock |
| KeTop T150 KeTop T155 | KEBA Touch Panel Membrane Keypad Replacement Repair | Available Now |
| KeTop T55 | KEBA Membrane Switch Touchscreen Panel Replacement | In Stock |
| KeTop T70 Handheld Terminal | KEBA Touch Screen Monitor Switch Membrane Repair | In Stock |
| KeTop T70-rqa-AKO-LK KEBA AT-4O41 Linz | KEBA Touch Screen Glass Membrane Keyboard Keypad Replacement | Available Now |
| OP 321/C OP 331/C bzw. /E | KEBA Keypad Membrane Touch Screen Panel Replacement Repair | In Stock |
| OP 341/C bzw. /E | KEBA Touch Digitizer Terminal Keypad HMI Replacement Repair | In Stock |
| OP 351/C | KEBA Operator Keyboard HMI Touch Glass Repair Replacement | In Stock |
| OP362-LD/C-5114 OP 362-LD/C-5114 | KEBA Membrane Keypad Touch Digitizer Glass Repair | Available Now |
| Wollin PC2 Keba C50 W KeTop 72811 | KEBA HMI Panel Glass Keyboard Membrane Replacement | Available Now |
| Keba KeTop Terminal | Description | Inventory status |
KEBA Kemro K2 HMI Manuals PDF Download:
FAQ:
Question: How to remove the KEBA Kemro K2-400 OF 450/Z OF450/Z operating panel?
Answer:
1) Disable the power supply.
2) Remove all electrical plugs from the operating panel.
3) Disconnect the ground cable from the ground bolt.
4) Loosen the mounting screws.
The operating panel is not ready for removal from the opening.
Question: KEBA Kemro K2-400 OF 450/Z OF450/Z touchscreen responds inconsistently
The position touched by the finger does not coincide with the cursor.
Cause: After the driver has been installed, when calibrating the position, you didn't touch the center point vertically.
Solution: recalibrate the center point.
Common misspellings:
KEBA Kemro K2-400 OF 450/Z OF40/ZKEBA Kemro K2-400 OF 45/Z OF450/Z
KEBA Kemro K2-400 OF 450/Z O4F50/Z
KEBA Kemro K2-400 OF 450/Z OF45o/Z
KEBA Kemro K2-400 OFF 450/Z OF450/Z
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
