NL8060BC31-01 LCD Display Panel Original Repair
| Categories | LCD Display |
|---|---|
| Brand | VICPAS |
| Model | NL8060BC31-01 |
| Warranty | 180 Days |
| Brand | NEC |
| Model | NL8060BC31-01 |
| Supply | NL8060BC31-01 LCD Display Screen |
| FOB port | Guangzhou, Shenzhen, Hongkong |
| Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, Credit Card |
| Update Time | Nov 21,2024 |
NL8060BC31-01 LCD Display for Replacement Repair 180 Days Warranty
If you are looking for original and authentic NL8060BC31-01 LCD's, then you're at the right place. VICPAS has been selling these HMI Parts for over 19 years and tests each unit before it ships out. VICPAS supply NL8060BC31-01 LCD display for replaced. The NL8060BC31-01 lcd display panel is original with VICPAS 180 days warranty, support Urgent Worldwide Shipping
STORAGE PRECAUTIONS
(1) High temperature or humidity may reduce the performance of NL8060BC31-01 module. Please store NL8060BC31-01 LCD module within the specified storage conditions.
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may damage NL8060BC31-01 LCD module when it is operating.
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the response time will become slow, and the starting voltage of the lamp will be higher than the room temperature.
OPERATION PRECAUTIONS
(1) Do not pull the I/F connector in or out while the NL8060BC31-01 LCD Panel module is operating.
(2) Always follow the correct power on/off sequence when the NL8060BC31-01 LCD module is connecting and operating. This can prevent the CMOS LSI chips from being damaged during latch-up.
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while assembling with the converter. Do not disassemble the module or insert anything into the NL8060BC31-01 LCD Screen Backlight unit.
OTHER PRECAUTIONS
(1) When fixed patterns are displayed for a long time, remnant image is likely to occur.
Specifications:
The table below describes the parameters of the NL8060BC31-01 LCD Display.
| Part Number : | NL8060BC31-01 |
| Product Line: | NEC |
| Panel mode: | Transmissive |
| Warranty: | 180 Days Warranty |
| Display Size: | 12.1" colour LCD |
| Display Colors: | 262K/16.2M color |
| Language: | Worldwide |
| Pixel Number: | 1280 x R.G.B. x 800 pixel |
| Pixel Pitch: | 0.204(H) x 0.204 (V) mm |
| Operating temperature: | 0 to +70°C |
FAQ:
Question: ASSEMBLY AND HANDLING PRECAUTIONS
Answer:
(1) The NL8060BC31-01 LCD Screen module should be assembled into the system firmly by using every mounting hole. Be careful not to twist or bend the NL8060BC31-01 LCD Display panel module.
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause an electrical short or damage the polarizer.
(3) Use finger stalls or soft gloves in order to keep theNL8060BC31-01 display clean during the incoming inspection and assembly process.
(4) Do not press or scratch the surface harder than an HB pencil lead on the panel because the polarizer is very soft and easily scratched.
(5) If the surface of the polarizer is dirty, please clean it with some absorbent cotton or soft cloth. Do not use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanently damage the polarizer due to a chemical reaction.
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they are left on the NL8060BC31-01 LCD panel for a long time.
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, legs or clothes, it must be washed away thoroughly with soap.
(8) Protect the NL8060BC31-01 LCD Display Screen module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the NL8060BC31-01 LCD Panel module.
(10) Do not pull or fold the lamp wire.
(11) Pins of I/F connector should not be touched directly with bare hands.
Question: What is the dimension of the NL8060BC31-01 LCD Display Screen?
Answer:The NL8060BC31-01 LCD display panel is 12.1 inch.
Question: What is the NL8060BC31-01 HMI LCD Display price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common misspellings:
NL8060BC31-1L8060BC31-01
NL8060B3C1-01
NL8060BC31-O1
NL80660BC31-01
NNL8060BC31-01
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
