FPM-1150G-RVAE FPM1150GRVA1801-T FPM1150GRVA1802-T FPM1150GRVA1803-T Touch Overlay

Order each part separately is available

Mounting the Monitor

The Advantech HMI FPM-1150G Series FPM-1150G-RVAE FPM1150GRVA1801-T FPM1150GRVA1802-T FPM1150GRVA1803-T Touch Digitizer Glass Front Overlay can be mounted in many different ways. The versatility of the FPM-1150G enables it to be mounted on your desk or anywhere else. The HMI Advantech FPM-1150G-RVAE FPM1150GRVA1801-T FPM1150GRVA1802-T FPM1150GRVA1803-T Protective Film Touch Panel can be mounted on 75*75 VESA screw holes. Every arm or mount kit with standard 75*75 VESA defining can be mounted by FPM-1150G easily. Noted The suggested size of screw of VESA is M4 x 6. If you need to install the Advantech screen FPM-1150G-RVAE FPM1150GRVA1801-T FPM1150GRVA1802-T FPM1150GRVA1803-T Touch Screen Front Overlay in a panel, release the mounting brackets by detaching four screws on rear side and fix them on the top and bottom with screws. To implement the panel mount completely, it required 10 clampers with M6 * 21mm screws, with a cut-out on the cabinet with 381.4 x 302.5mm. Below are the details of the installation on Advantech touch screen FPM-1150G-RVAE FPM1150GRVA1801-T FPM1150GRVA1802-T FPM1150GRVA1803-T Protective Film Touch Screen Monitor:
1. Insert FPM into the cabinet, retrieve all 12 clamps for installation.
2. Insert all the hooks into the holes following the arrow in the picture above.
3. Tighten the screws to affix the FPM in place.