Advantech TPC-315-RE22A TPC-315-RJ22A Protective Film Touchscreen Repair

Order each part separately is available

Safety Instructions

1. Disconnect the equipment from all power outlets before cleaning. Use only a damp cloth to clean the HMI Advantech TPC-315 EHL Series TPC-315-RE22A TPC-315-RJ22A Front Overlay Touch Screen Panel. Do not use liquid or spray detergents.
2. Protect the equipment from humidity.
3. Do not expose the Advantech HMI TPC-315-RE22A TPC-315-RJ22A HMI Panel Screen Protective Film to direct sunlight, or install the equipment in an environment with direct sunlight, as this may cause damage.
4. Never pour any liquid into an opening. This may cause fire or electric shock.
5. Place the equipment on a reliable surface during installation. Dropping or letting the Advantech HMI TPC-315-RE22A TPC-315-RJ22A Touch Screen Front Overlay fall may cause damage.
6. The openings on the enclosure are for air convection. Protect the TPC-315-RE22A TPC-315-RJ22A Protective Film HMI Touch Glass from overheating. Do not cover the openings.
7. If the equipment is not used for a long time, disconnect it from the power source to avoid damage from transient overvoltage.
8. Do not leave the Advantech screen Industrial Thin Client TPC-315 EHL Series TPC-315-RE22A TPC-315-RJ22A Touch Screen Glass Protective Film in an environment with a storage temperature of below -20 °C (-4 °F) or above 60 °C (140 °F) as this may cause damage. The equipment should be located in a controlled environment.
9. Be aware that the rear cover may become quite hot during operation. To avoid scalding or personal injury, do not touch the rear cover.
10. All cautions and warnings on the equipment should be noted.