Kawasaki 50817-1298 Teach Pendant Parts for repair

Order each part separately is available

Warning

This Kawasaki parts 50817-1298 Screws, Keypad Membrane, HMI Case, E-Stop Button Label, LCD Screen, Hanger and Touch Screen Panel Teach Pendant is compound explosion-proof type that is constructed with pressurized mechanism and intrinsically safe construction mechanism.

The Kawasaki robot arm and painting device are explosion proofed by a built-in pressurizing mechanism that keeps air within the machine at a higher pressure than the paint booth. This stops gases from entering construction parts and prevents any ignition danger at robot arm's motors/encoders (at normal operation), electrical connections, etc.

The explosion-proof robot protects the motor and machine harness in the arm from explosive gases using pressurized air. However, this protection does not extend to the separate harness connecting the arm with the controller. Make sure the separate harness and parts for Kawasaki 50817-1298 Terminal Keypad, Hanger, Touch Digitizer, LCD Display, Screws, E-Stop Button Label and Plastic Shell Teach Pendant is not directly exposed to a large quantity of solvent, since the solvent may damage cable coatings causing earth faults or short circuits that may lead to fire. Also, inspect the surface of cable and protecting tube regularly for damage, and replace the separate harness every three to five years.

Purge all explosive gases first before supplying power to Kawasaki parts 50817-1298 Hanger, Front Case, Back Cover, HMI Touch Glass, Membrane Keyboard, LCD Panel, Screws and E-Stop Button Label Teach Pendant. Install a pressure detection device in the booth that activates automatically if air pressure drops due to error etc. so that power supply can be cutoff immediately (Interlock). Also, power supply must be disabled until the purging is confirmed to be complete, even if the error is cancelled.

For intrinsically safe devices, energy supply to them is limited so that they may not cause explosion within the paint booth under any possible operation or condition. This construction applies to the parts for Kawasaki 50817-1298 Screws, Housing, E-Stop Button Label, LCD Display Screen, Membrane Switch, Touch Screen Tablet and Hanger Teach Pendant, device to detect the pressure in enclosures and the encoders (only in backup mode).