M2I X TOP Wide Series XTOP04TW-UD HMI Screen Overlay
M2I X TOP Wide Series XTOP04TW-UD Front Overlay Touch Membrane Replacement
Order each part separately is available
Precautions on Install X TOP Wide Series XTOP04TW-UD Touch Screen Front Overlay
Do not install the location which exceeds allowed temperature. Product can be damaged or shorten the life. Especially Install environment of XTOP04TW-UD Protective Film HMI Panel Glass as below should be avoided.
1. Do not Install product to the place which the ambient temperature is out of limits, from 0C to 50C or on the surface of control board which high pressure equipment is installed.
2. Do not install X TOP Wide XTOP04TW-UD Protective Film Touch Membrane to the place where strong shock or vibration continuously have impacted on product.
3. The space between back of product and back of control board must be more than 100mm for maintenance and ventilation.
4. Do not storage and operate XTOP04TW-UD Touch Screen Glass Front Overlay in the place in direct sunlight. By the strong ultraviolet rays can degrade the quality of LCD Displays.
General Precautions
1. Do not strike the XTOP04TW-UD Protective Film Touch Screen with a hard or pointed object (such as drill, driver, pen, etc.)or press on the touch screen with too much force. It may cause malfunction of touch panel by damaged front sheet.
2. Do not use or store in severe vibration environment.
3. Do not allow water, liquids, foreign substances such as metal powder into XTOP04TW-UD Touch Panel Front Overlay product. It can damage product or cause malfunction by an electric shock.
4. Do not allow water, liquids, foreign substances like metal powder into the space between protection sheet and front sheet. It may cause malfunction of touch panel and indistinct screen display.
5. Use a cellular phone or walky-talky more than 30cm (11.81 inch)away from XTOP04TW-UD Touch Digitizer Protective Film product.
Specifications:
The table below describes the parameters of the M2I XTOP04TW-UD Touch Screen Display Front Overlay HMI Parts.
Panel Type: | Analog Resistive Film |
Ambient Humidity: | 85% RH or less |
Backlight: | Yes |
Display Type: | TFT Color |
Operation Temperature: | 0°C ~ +50°C |
Part Number: | XTOP04TW-UD |
Product Line: | X TOP Wide Series |
Status LED: | Built-in |
Storage Temperature: | -10°C ~ +60°C |
Warranty: | 365 Days |
Related M2I X TOP Wide Series HMI Part No. :
M2I X TOP Wide Series | Description | Inventory status |
XTOP05TW-UD | M2I X Top Wide Series Protective Film Touch Panel Glass Repair | Available Now |
XTOP07TW-LD | M2I X Top Wide Series Front Overlay Touch Membrane Replacement | In Stock |
XTOP07TW-UD | M2I X Top Wide Series HMI Touch Glass Protective Film Repair | Available Now |
XTOP10TW-UD | M2I X Top Wide Series Touch Screen Display Front Overlay Replacement | In Stock |
M2I X TOP Wide Series | Description | Inventory status |
M2I X TOP Wide Series HMI Manuals PDF Download:
FAQ:
Question: What are the environment specifications of M2I X TOP Wide Series XTOP04TW-UD Front Overlay Touch Screen Display?
Answer:
Question: What are the front part names and specifications of M2I X TOP Wide Series XTOP04TW-UD?
Answer: The front part names and specific cation of M2I X TOP Wide Series XTOP04TW-UD are TFT 16M Color LCD, Analog Touch Panel and Front Cover Sheet for Damp Proof and Dust Proof.
Common misspellings:
TOP04TW-UDXTOP4TW-UD
XTOP04TWUD
XTOP04TWU-D
XTOP04TW-DU
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content