Liyitec TP-104F-22 UN Touch Screen Panel Replacement

Store packaged TP-104F-22 UN HMI Touch Glass at the temperature and humidity mentioned in the specification with care. Do not expose TP-104F-22 UN Touch Panel to direct sunlight or stress such as that caused by piling. Check for the correct vertical direction of the package before unpacking. Clean finger sacks or gloves and mask are required during handling to prevent finger-prints or stain on the TP-104F-22 UN Touch Screen Monitor and damages to the TP-104F-22 UN MMI Touch Screen caused by sharp edges. Do not handle the viewing area of the TP-104F-22 UN panel. Do not handle the panel at the tail (connector) to prevent detachment of the tail to the TP-104F-22 UN Touch panel.

Clean soft clothes with neutral detergent or ethanol may be used for surface TP-104F-22 UN HMI Touch Screen cleaning. Do not use any chemical solvent, acidic or alkali solution for TP-104F-22 UN Touch Screen Hmi cleaning. Any use or soaking of liquid that may result peeling or malfunctioning of the film and glass is prohibited. Excessive force or strain to the panel or the tail is prohibited in the process of TP-104F-22 UN Touch Digitizer Installation