MPCYT90NNN00N Magelis Front Overlay Touch Membrane
MPCYT90NNN00N Magelis Front Overlay Touch Membrane
Schneider Magelis HMI MPCYT90NNN00N Touch Screen Monitor Protective Film Repair Part
Magelis Schneider MPCYT90NNN00N industrial touchscreen display is in the range of Magelis iDisplay, the component type is Flat Screen. MPCYT90NNN00N Touch Screen Panel Glass Terminal Type is Touchscreen display integrating USB or RS232C port, VGA or DVI-D port. MPCYT90NNN00N Touch Digitizer Glass HMI rated supply voltage is 100...240 V AC power supply conforming to EN 61131-2, Supply voltage limits 98...264 V. Schneider Magelis iDisplay MPCYT90NNN00N Touchscreen Panel is 15 inch with active matrix colour TFT 1280 X 1024 pixels XGA LCD Display.
VICPAS supply MPCYT90NNN00N Magelis Schneider Touch screen panel glass and protective film with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the MPCYT90NNN00N Magelis Schneider Front Overlay Touch Screen.
| Part Number: | MPCYT90NNN00N |
| Display Type: | LCD TFT |
| Screen Diagonal: | 19 in |
| Warranty: | 365 Days |
| Product Line: | Magelis iDisplay Series |
| Terminal Type: | Touchscreen Display |
| Operating Temp.: | 0...50 °C |
| Storage Temp.: | -20...60 °C |
| Display Resolution: | 1280 x 1024 pixels SVGA |
| Operating System: | Windows XPe SP2 |
Related Magelis Schneider iDisplay Series Part No. :
| Magelis iDisplay Series | Description | Inventory status |
| XBTF011110 | Operator Terminals with 5.7-inch Operator Keypad | In Stock |
| Magelis iDisplay | Description | Inventory status |
Schneider Magelis iDisplay HMI Manuals PDF Download:
FAQ:
Question: How to install the Schneider Magelis iDisplay MPCYT90NNN00N Power Switch Cover?
Answer:
1. Shut down Windows® in an orderly fashion and remove all power from the device.
2. Remove the iDisplay unit from its mounting and place it on a clean level surface with the front panel facing downwards.
3. Switch ON the power switch.
NOTE: The 24 Vdc power supply inside the DC-powered iDisplay units is protected by an 8 A fuse. This fuse is located inside the power supply and cannot be accessed or replaced by the user.
4. Attach the power switch cover with the screw. Use a torque of 0.5 to 0.6 N•m (4.5 to 5.3 lb-in):
5. First ensure that the power cord is disconnected from the main power supply, then connect the power cord to the iDisplay unit
Question: What is the size of MPCYT90NNN00N Protective Film HMI Panel Glass?
Answer: The Schneider Terminal MPCYT90NNN00N Touch Screen Monitor Front Overlay is 19-inch.
Common misspellings:
MPYT90NNN00NMPCYT90NN00N
MPCYT90NNNooN
MPCYT90NNNN00N
MPCYT90NNN000N
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
