B&R 5P62:JENSEN-SEN-03 Touch Screen 5P62:JENSEN-SEN-08 Touch Panel
B&R 5P62:JENSEN-SEN-03 Touch Screen 5P62:JENSEN-SEN-08 Touch Panel
B&R 5P62:JENSEN-SEN-03 Touchscreen Panel 5P62:JENSEN-SEN-08 Touch Panel Repair Replacement
An B&R 5P62:JENSEN-SEN-03 is connected to the integrated SDL interface (onboard) via an SDL cable. USB devices can only be connected directly to the Automation Panel (i.e. without a hub). Many different peripheral USB devices can be connected to the 2 or 3 USB interfaces on the Automation Panel 900. These can each handle a load of 500 mA. The maximum transfer rate is USB 2.0. Only end devices (not hubs) can be connected to the Automation Panel 900.
5P62:JENSEN-SEN-08 Touchscreen Panel Each key or LED can be configured individually and adapted directly to the application. Various B&R tools are available for this purpose:
• B&R Key Editor for Windows operating systems
• Visual Components for Automation Runtime
Keys and LEDs from each device are processed by the matrix controller in a bit sequence of 128 bits each.
The positions of keys and LEDs in the matrix are shown as hardware numbers. These hardware numbers can be read directly from the target system using the B&R Key Editor or the B&R Control Center.
Specifications:
The table below describes the parameters of the 5P62:JENSEN-SEN-03 5P62:JENSEN-SEN-08 Touchscreen Panel.
| Part Number : | 5P62:JENSEN-SEN-03 |
| Product Line: | 5P62:JENSEN-SEN-08 |
| Screen diagonal | 10.4 in |
| Warranty: | 365 Days Warranty |
| Input Power | 24 VDC |
| Display Type: | TFT color |
| Mounting position: | Vertical |
| Input Type: | Touchscreen |
| Serial interface Type: | RS232 |
| Storage | -20 to 70°C |
FAQ:
Question: What causes Automation Panel HMI B&R 5P62:JENSEN-SEN-03 Touch screen burn-in?
Answer:
• Static images
• No screensaver
• Sharp transitions in contrast (e.g. black/white)
• High ambient temperatures
• Operation outside of specifications
Question:How can the B&R 5P62:JENSEN-SEN-08 Touch Panel service life of the backlight be extended?
Answer:
• By setting the display brightness to the lowest value that is still comfortable for the eyes
• By using dark images
• By reducing the brightness by 50%, which can result in an approximately 50% increase in the half-brightness time
Common misspellings:
5P62:JENSEN-SEN-03
5P62JENSENSEN03
5P62:JENSENSEN03
5P62 JENSEN-SEN-03
5P62 JENSEN-SEN-08
5P62:JENSENSEN08
5P62:JENSENSEN-08
5P62 JENSEN-SEN08
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
