6FC5203-0AF04-1BA1 Siemens SIMATIC OP08T Membrane Keyboard

Teaching in programs of Siemens 6FC5 203-0AF04-1BA1
• The "Teach in"function of 6FC5203-0AF04-1BA1 Housing Terminal Keypad can be used to edit programs in the "AUTO" and "MDA" modes.You can create and modify simple traversing blocks.
• You traverse the axes manually to specific positions in order to implement simple machining sequences and make them reproducible. The positions you approach are applied.
• In "AUTO" teach-in mode, the selected program of 6FC5 203-0AF04-1BA1 Operator Panel Keypad is "taught".
• In "MDA" teach-in mode, you teach to the MDA buffer.
• External programs of 6FC52030AF041BA1 Membrane Keyboard Plastic Case, which may have been rendered offline, can therefore be adjusted and modified according to need.

General sequence of 6FC52030AF041BA1
• Select the desired program block, press the relevant softkey "Teach position", "Rap.tra.G01", "Straight line G1" or "Circ.interm.pos.CIP" and "Circ.end pos.CIP" and traverse the axes to change the program block of 6FC5203-0AF04-1BA1 Membrane Keyboard Keypad.
• You can only overwrite a block with a block of the same type.
-OR-
• Position the cursor at the desired point in the program of 6FC5 203-0AF04-1BA1 Shell Housing Terminal Keypad, press the relevant softkey "Teach position", "Rap.tra.G01", "Straight line G1"or "Circ.interp.pos.CIP", and "Circ.end pos.CIP" and traverse the axes to insert a new program block.
• In order for the block to be inserted, the cursor must be positioned in an empty line via the "Cursor" and "Input" keys.
• Press the "Accept" softkey of 6FC52030AF041BA1 Switch Membrane HMI Cover to teach-in the modified or new program block.