Guangzhou Vicpas Touch Technology Co.,Ltd using only the best materials and exacting standards of quality assurance, is committed to customer satisfaction in the Highest Quality Material, Large size, High light transmittance, Free of Maintaining, Complete Reliability, Superior Product Durability, Design Flexibility, World-Class Service and Support:
*The ITO film imported from Japan, with long life cycle-more than 1 million touches in one location without failure;
*Drift free, Deviation of Error below 1.5%, suitable for the operation;

Outer packing is strong carton with Five corrugating medium, inner packing is foam which would protect theproduct in well condition. 

Shipping:

1. Shipping via DHL / FedEx / UPS /TNT / TOLL / Aramex / EMS . Fast , Safe , Good service.
2. We will ship the parcels within 1-3 working days after receiving your payment.
3. Normally , you would receive the parcels within 3 - 5 working days. (if ship by DHL / Fedex / UPS air express) .
4. Please make sure your shipping information are all in correct way (including address / post code /phone number / contact person / VAT number ).

  Why no have a try?

Thank you very much for your interest in VICPAS products and VICPAS Company,below are few questions you may want answers.

1. Is there a circuit diagram I can refer to ?

Yes, circuit diagram is available in the product specification sheet.Please refer to the specification sheets available in Analog Resistive Touch screen Controller (4W-TFT) for 4 wire resistive controller.Please refer to the specification sheets available in Analog Resistive Touch screen Controller (5W-TFT) for 5 wire resistive controller.

2. How does the resistive touch screen work?

When you press your finger on a resistive screen, the top, flexible layer touches the bottom one, and the interruption in the electrical current is noted by the device, and it calculates the precise location of the point of contact. Depending on what button is located under your finger, the software registers the coordinates and performs the command. they respond to pressure, you can activate them with bare fingers, gloves, or styluses (remember the PalmPilot ?), but you can't swipe or use multi-touch gestures, because the electric current encased within can only successfully register one point of contact at a time.

3. What do I need to use a touchscreen?

Touchscreen, controller, controller cable, and driver software are needed.
In addition, a host computer (to which the driver software will be installed) and monitor (on which the touchscreen will be mounted) are needed.

4. Does a resistive touchscreen recognize multiple touched points simultaneously ?

VICPAS Multi-touch Analog Resistive Touchscreen recognize multiple touched points at a time.4-wire and 5-wire touchscreens do not recognize multiple touched points at a time.

5. Are the controllers compliant with RoHS ?

Yes, all of our controllers are compliant with RoHS.Please refer to Resistive Touch Screen - RoHS for status of compliance.

6. How is your production management and quality control system?

VICPAS develops process - oriented QMS to identify and meet needs of customer requirement and expectation in an effective and efficient manner to achieve competitive advantage.
All our product process follows up ISO9001: income quality checking, in process quality checking, final product quality checking. The strict implementation of ISO9001 assures to provide error – free products to our customers.
We will show you these in our workshop during your visiting.
If you are interested in our products,please contact us for further information without hesitate.We will reply you as soon as we receive your inquiry.

VICPAS Looking forword to your cooperation.          To VICPAS homepage